broken belt and idler pulley

ApplianceRoper Dryer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

brad From fruithurst, AL

Aug 30, 2011

0 out of 1 people found this instruction helpful

real simple,remove the two screws that holds the lent trap,then use a flat head screw driver to pop the front of the top up.then remove the two screws that holds the front to the sides,now lay the dryer on its back and remove the front and set it carefully pull the tub straight up and set aside.the idler pulley has probably fallen off its track,but know worries,it will go back once you have installed new belt.clean all of the lent that has been stuck around everything over the years.put the tub back in place,making sure that it ligns up put the new belt back making sure that it ligns up with the old the idler pulley back in place and turn the tub counter clocwwise to make sure it is aligned.put front back in place and snap the top on and reinstall the two screws in lent trap.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Idler Pulley Assembly

Part Number: PS383724

In Stock