Dryer banging and clothes getting stuck between tub and felt pad while tumbling.

ApplianceMaytag Dryer

ModelSDG3606AWW

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Socket set

christopher From sycamore, IL

Aug 20, 2011

10 out of 379 people found this instruction helpful

Very easy repair. I took off the bottom fromt panel with a nut driver. Then I took off the face/door panel. Take note of the wires that need to come off by marking them with a sharpie or tape. The top of the dryer can be stood up to allow access to the ductwork that has the felt pad on it. The felt pad was worn through in spots, the drum glide was completely gone and both cylinder glide brackets were almost completely worn through. I just replaced the brackets and the pads. The old felt came off fairly easily. I scraped the old glue for the felt off with a knife and cleaned and dried the surface before applying the hi temp adhesive. I waited 1 minute while the glue became tacky (be careful, the glue starts out thin and tends to run) and the felt pad was easily put back in place with my wife's help. Everything was very simple and it cost $87.00 for parts and shipping. I felt that this should be a good investment since I have had no other problems with this dryer and this is normal wear and tear. Better than paying $600+ for a new dryer. The video for changing the felt pad was very detailed and easy to follow as well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Single Drum Glide Felt Pad

Part Number: PS1610155

$3.91
In Stock

Cylinder Glide Bracket

Part Number: PS2039403

$18.07
In Stock

Cylinder Felt Seal

Part Number: PS2039485

$16.61
In Stock

Drum Glide

Part Number: PS2039613

$3.91
In Stock

High Temperature Adhesive - 2oz.

Part Number: PS2196040

$12.33
In Stock