Upper Agitator not working properly, noisey.

ApplianceRoper Washer

ModelRAX7245KQ2

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Jack From Dallas, TX

May 16, 2011

0 out of 3 people found this instruction helpful

Bottom Agitator was working, but top part wasn't. It was running ok, but not cycling the clothes from top to bottom.
The repair was fairly simple. I took the cap off the center, and down inside was a domed looking disk with an O ring on it. I turned it a little to unseat it, and it came right out. I used a Socket wrench with an 11mm socket and multiple extentions to reach down to the bolt. When I took out the bolt, the whole thing comes out. I got the top agitator piece, it needed one. the repair kit, it needed this also. And a thrust washer that I did not need. The kit came with a thrust washer, and I didn't know it. The washer only cost $2 and something, so I didn't worry about it to much. Had all the instruction, with pic's, so it was no problem to replace. Anyone with a little mechanical know-how will breeze through it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thrust Spacer

Part Number: PS334562

$2.52
In Stock

Agitator Repair Kit

Part Number: PS334650

$17.87
In Stock

Upper Agitator

Part Number: PS340841

$46.13
In Stock