Water leak from cracked Icemaker Water Line

ApplianceGeneral Electric Refrigerator

ModelTPX24BRBBBB

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Pliers
Nutdriver
Screw drivers
Wrench(Adjustable)

Joe From Glenmoore, PA

Apr 14, 2011

14 out of 24 people found this instruction helpful

This repair was done on a 13 year old fridge. Within the last several years I had to replace the Incoming Water Line twice, the line from the Inlet Water Valve to the Dispenser Water Reservoir, and this time the Icemaker Water line. These were all due to the plastic tubing hardening and becoming brittle from the heat of the compressor.

For this repair, I not only replaced the cracked Icemaker Line, I replaced the Incoming Water Line with copper, and replaced the Dispenser Water Reservoir. If you have a leak in one of the plastic water lines around the Valve Assembly, I recommend you do the same.

The Icemaker Water Line instructions from Stephen from Raleigh was very helful and complete.

I found Scot from Fort Collin's instructions on replacing the Reservoir very helpful too. Although I found his comment that one line was too short, to not be the case. In fact I had to trim both lines because they were too long.

Scott from South Lake Tahoe's suggestion to use the old Reservoir Lines to fish the new ones is good. I used duct tape to attach them together instead of drip irrigation fittings, and it worked fine. It helps to have somebody at the back of the fridge to pull the line while you push it from inside the fridge.

The line to the door connection can be accessed by removing the grill at the bottom of the front of the fridge.

Pretty easy repair. Thanks to the other contributors for the help!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Plastic Tubing - 5/16"

Part Number: PS292878

$14.73
In Stock

Dispenser Water Reservoir

Part Number: PS294082

$79.87
In Stock

Insert - 5/16"

Part Number: PS297788

$2.83
In Stock

Fill Tube Clamp

Part Number: PS297951

$3.62
In Stock

Icemaker Fill Hose Extension

Part Number: PS298725

$17.03
In Stock

Fill Tube Grommet

Part Number: PS299055

$14.54
In Stock

Icemaker Water Line

Part Number: PS299643

$12.38
In Stock

1/4 Tubing Nut

Part Number: PS304401

$3.62
In Stock