Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My ice auger would not work.
After taking the complete motor, tray, icemaker, etc out and finding no problem, I then finally checked for power at the connector at the top of the icemaker. I concluded that there was no pwoer going to the motor. I then removed the circiut board and found the relay for the auger was not working. Putting the new board in took 10-15 min.
... Read moreand then the auger started to work.
Read less
Dennis from Point Roberts, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
7 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Winston
February 18, 2020
Replace lever for water dispenser put it back together ice maker kept on shooting ice then everything quit working.
For model number Electrolux,, model
Hello and thank you for writing.
Sounds like there was a short somehow. It certainly sounds like it could be a faulty Dispenser switchboard PS976808 and/or possibly a malfunctioning dispenser control board PS1526493
you should check the part(s) for signs of damage or test with a multimeter as this is the only way to determine which is the defective part, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
I have replaced the solenoid and auger motor on this refrigerator and the auger is still not turning to push out of the ice tray. Do I need to replace the micro switch or circuit board 241527601 ?
For model number LECR23EFEO
Hi Mark,
Thank you for your question. If you have already replaced the solenoid and the auger motor and the auger will still not push the ice through the chute, you will need to check the micro switch and the dispenser control board. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!