No heat - otherwise worked fine

ApplianceMaytag Dryer


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Wrench set
Screw drivers
Socket set

Nikiforos From Skillman, NJ

Dec 25, 2010

15 out of 17 people found this instruction helpful

Although I ordered the heating element and thermal fuse in anticipation I really needed the Terminal Insulator kit for the heating element. The screw that the heating element is attached to on one side and the power supply on the other snapped (the weld joint came apart). First removed the front panel by unscrewing the two screws that hold it in place which are located about 4" from the floor. Next removed the front cover of the heater housing by undoing the two screws that hold it to the bottom plate and unscrewed the nuts that hold the heating element in place on the inside and the outside of the heater housing. Assembly was easy just follow the steps backwards.
! When the front is off it is a good time to use a vacuum cleaner to remove the lint that accumulates everywhere, especially in the air output !

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thermal Fuse

Part Number: PS2030126

In Stock

Heater Element - 240V

Part Number: PS2200568

In Stock