Level of DifficultyReally easy
Time to do repair15 - 30 mins
Age of Appliance5 - 10 years
Steven From Oklahoma City, OK
Dec 21, 2010
4 out of 6 people found this instruction helpful
removed the two 'lock down flanges' from the back of the machine, lifted the top from the front and slid it forward to access the valve. Removed the two electrical connections then the compression ring from the hose on the output side. Removed two screws holding the valve in place, then reversed the process.
I wish this valve was made of metal rather than plastic. I had to replace it because the threads were stripped. Here's the heads up. Make sure the fittings on your supply hoses are 'clean' or you'll mess up the plastic threads and not get a good seal.
|Part Photo||Part Description||Price||Availability
Part Number: PS815509