Long-time screach, drum finally stopped turning.

ApplianceMaytag Dryer


Level of DifficultyEasy

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Barry From Port Matilda, PA

Dec 16, 2010

0 out of 1 people found this instruction helpful

Although I'm mechanically inclined, you can do this repair if you've every used a screwdriver. I found a repair manual online and read through it just to make sure I was on the right path. I took the front panel(s) off, lifted the top up and out of the way, slipped the belt off the drum, and removed the drum. The rollers are easily replaced by taking a snap-ring off the end of the shaft. Clean the shafts and install the new rollers. The belt is easier to put on than replacing one on a car...actually, no tools required, just reach in and guide it over the motor pulley, pull the tension pulley back and slide the belt over it....line it up a little on the drum and that's it. Be careful putting the drum back in...that the felt guides are in place. Put the top and front parts back on and you're done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Support Roller Kit

Part Number: PS1570070

In Stock

Multi-Rib Belt

Part Number: PS2036214

In Stock