Water was leaking from the tub to the floor.

ApplianceHotpoint Washer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers

Nolan From Fort Polk, LA

Mar 20, 2010

3 out of 4 people found this instruction helpful

First I removed the two clamps that hold the inlet drain hose onto the pump. **There may still be water in the hose** This was pretty easy, but a set of vice grips would have been nice. The space is not too cramped, but required a little bit of wiggling. Putting it on was a little bit harder, just because I did not want to tear the hose on the tub or pump inlet. Make sure both are fully seated or else it could still leak. The drain hose and the clip are pretty self explanatory. I tried to buy a generic drain hose at a big box lumber yard, but I could never make it fit right.

Hope this helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Hose Clip

Part Number: PS270508

In Stock

Drain Hose Extension - 4 1/2' Long

Part Number: PS890597

In Stock

Pump to Tub Inlet Drain Hose

Part Number: PS2322462

In Stock