Dryer wouldn't tumble.

ApplianceKenmore Dryer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Luis From Turnersville, NJ

Mar 04, 2010

0 out of 1 people found this instruction helpful

First I removed the control lid which was held down by two screws. Then i removed thw two screws holding down lint trap. I lifted the top lid then had to remove the top two inner screws that hold the front panel up. Removed the front panel looked underneath the drum and i could see the pulley system. You were able to see the mark on the drum from the old belt so that gave you a good indication of the positioning of the new belt. Then replaced all the screws and done a fairly easy job and you save yourself alot of money with the repairman.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

$13.70
In Stock