The dryer belt broke.

ApplianceMaytag Dryer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Socket set

Troy From Roscommon, MI

Mar 09, 2009

1 out of 1 people found this instruction helpful

I removed the two screws located on the front panel close to the bottom. I took the front panel off. Then I removed the four screws holding the framework in place in front of the tumbler. Then I removed two more screws, each located on the upper inside of the front of the top. Then I took the top off and set aside. Next, I took out the tumbler and put some oil on the rear rollers. I installed the belt around the pulley system located at the rear left side of the dryer. Then I stretched the belt around the tumbler, aligning it about 2 inches back from screws located towards the back of the tumbler. Afterward, I put everything back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tumbler and Motor Belt

Part Number: PS2200550

In Stock