the old screws were not correct so it took 1/2 hour for me to find screws that would. there should have been proper screws sent with the end cap.

ApplianceGeneral Electric Range


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

anthony From Jacksonville, FL

Nov 25, 2008

2 out of 2 people found this instruction helpful

I attached the end caps to my existing handle, but had to squeeze the parts together very hard to get them to mesh to the correct distance of the holes. I removed the screws holding outside frame of the oven door. I then opened the door fully, propping it up on my knee and removed the inside end cap screws. Placing the handle in position underneath the propped door, I attached the screws. Lastly I reassembled the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Handle End Cap

Part Number: PS256613

In Stock