Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS231857
This part works with the following brands: GE, Hotpoint & Kenmore.
This oven door handle end cap is used on both the left and right hand sides. Sold individually.
1] removed door and put it on bench2] removed two screws to open up face of door3] wedged aa 2" x 4" between face of door and back of door4] used nut-driver to remove the damaged end-cap [this part holds the stove handle in place]5] put handle on one side to good end-cap and slipped new end-cap on handle and put it opening where old end-cap came off6]screwed in new part and screwed together face and back of oven door7] put door back on oven
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed screws in door and pulled apart inside and outside, broken plastic pieces fell everywhere. Removed interior screws that held the end caps for the handle. Put the new end caps and handle together, placed on door and screwed in the interior screws to hold handle. Pushed inside and outside of door together and replaced screws. It appears that there were spaces on those screws that correctly placed the inside and outside which were broken to shreds. I could not find those on the the parts list so the door is not as good as it should be.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.