Troy-Bilt Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Troy-Bilt Appliance Parts
Shop By Part Type

Popular Troy-Bilt Parts

Fuel Tank Assembly W/Fuel Lines Incl. 29 – Part Number: 753-06797
Your Price
$22.11
   In Stock
Troy-Bilt Fuel Tank Assembly W/Fuel Lines Incl. 29
★★★★★
★★★★★
1 Review
PartSelect Number PS11812933
Manufacturer Part Number 753-06797
The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
Grass Catcher Frame – Part Number: 647-04271-0637
Your Price
$37.15
   On Order
Troy-Bilt Grass Catcher Frame
★★★★★
★★★★★
1 Review
PartSelect Number PS9988561
Manufacturer Part Number 647-04271-0637
Fuel Tank Assembly – Part Number: 753-06183
Your Price
$13.77
   In Stock
Troy-Bilt Fuel Tank Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS10009586
Manufacturer Part Number 753-06183
This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines are clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.
Fixes these symptoms
Installation Instructions
Erik from ROBERTSDALE, AL
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done. Read more...
Clip-Hold Down (Nylon) – Part Number: 1724869099
Your Price
$11.36
   In Stock
Troy-Bilt Clip-Hold Down (Nylon)
★★★★★
★★★★★
1 Review
PartSelect Number PS9903766
Manufacturer Part Number 1724869099
Hold-down clips, also known as retaining, locking or fastening clips, are designed to secure and fasten specific parts within equipment, and the use depends on the type and model. This hold down clip is used to secure the chute of various models of snowblowers, and is sold as an individual OEM part, without any securing hardware. Made of nylon, this clip secures to the chute with two screws and two washers. If you notice a wobbly or insecure chute resulting in excessive vibrations from the chute, check to make sure the clip is in-place before inspecting it for damage and ordering a replacement. To replace this clip, you will need to gain access to the chute, with either a screwdriver or wrench, and once you can access it, it is as simple as unscrewing the old clip and installing the new clip and rest of the assembly.
Shear Pin, .25 – Part Number: 738-04124A
Your Price
$3.99
   In Stock
Troy-Bilt Shear Pin, .25
PartSelect Number PS9110822
Manufacturer Part Number 738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.
Throttle Cable – Part Number: 753-06831
Your Price
$11.83
   In Stock
Troy-Bilt Throttle Cable
★★★★★
★★★★★
1 Review
PartSelect Number PS10009725
Manufacturer Part Number 753-06831
Rear Axle Assembly – Part Number: 911-04144B
Your Price
$33.18
   Special Order
Troy-Bilt Rear Axle Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS10023414
Manufacturer Part Number 911-04144B
Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate. This part replaces part numbers 911-04144 and 911-04144A. Wear work gloves to protect your hands when installing this part.
Line trimmer cutting head assembly – Part Number: 841-013303S
Your Price
$15.69
   On Order
Troy-Bilt Line trimmer cutting head assembly
★★★★★
★★★★★
1 Review
PartSelect Number PS16583608
Manufacturer Part Number 841-013303S
Installation Instructions
Randall from TREMONT, IL
Plastic bump head housing cracked
Unscrewed the old (LEFT HAND THREADS), screwed on the new. Done!!! Read more...
Air Filter – Part Number: 753-05996
Your Price
$3.99
   In Stock
Troy-Bilt Air Filter
PartSelect Number PS9117898
Manufacturer Part Number 753-05996
Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451
Your Price
$4.07
   In Stock
Troy-Bilt Carriage Bolt, 5/16-18 x .75
PartSelect Number PS10001568
Manufacturer Part Number 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Related Troy-Bilt Parts

Back to Top

Popular Troy-Bilt Models

Below are the most popular Troy-Bilt models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More
Back to Top