RCA Refrigerator Hardware

Your Price

$8.08

RCA Refrigerator Screw

★★★★★

1 Review

PartSelect Number PS1020128

Manufacturer Part Number WR01X10590

This refrigerator door handle mounting screw connects your refrigerator door to the handle. The part is less than 1 inch in length, and can come in both silver and gold colors. When installing this screw, make sure to avoid cross-threading and use reasonable torque to avoid damage to components. This part is an OEM part sourced directly from the manufacturer. This part is sold individually.

Installation Instructions

Jerry from Esparto, CA

Handle broke on the top where the screws go.This is the second handle that broke in the same place in 5 years.

Remove the top screws, with a Philips screw driver, take broken piece out. Then remove the plastic cover on bottom of handle, take the torx screw out. Now handle is off.Put new handle in place and put all three screws back in. Then install new plastic cap, and you are all done. Read more...

Your Price

$31.02

RCA Refrigerator Sheet Metal Screws - 12 per pack

PartSelect Number PS294565

Manufacturer Part Number WR1X1726D

This is a replacement pack of sheet metal screws for your refrigerator. These are Phillips-head screws, and are approximately ¾ of an inch long. This package contains 12 screws. These screws are typically used to attach your refrigerator or freezer door handles to the door. These screws are OEM parts sourced directly from the manufacturer.

Installation Instructions

Carla from BERKELEY, CA

Handles on fridge were discoloured and looked very bad

Actually - we followed the instructions in a video provided by :parts select" when we ordered the parts [the 2 fridge door handles]. It was easy to order with the model number, easy to remove the old handles & easy to install the new ones with the instructions on your web site, and everything arrived timely & reasonably priced. Thanks a heap! Read more...

Your Price

$8.08

RCA Refrigerator SCR 8-18 CA HX 1/2 S

PartSelect Number PS1483082

Manufacturer Part Number WR01X10606

Your Price

$8.08

RCA Refrigerator Water Tubing Clip

PartSelect Number PS295031

Manufacturer Part Number WR1X5278

This water tubing clip, also known as a P-clamp, is usually used within refrigerators and freezers to organize the water line and tubing, but due to its versatility, this clip may also be used in other applications, like securing other cables. Made of metal and measuring approximately 1-inch in length, this clip features a hole on each side to allow you to screw it into the side of your appliance and secure the appropriate valve, tube, or cable. This clip is a genuine OEM part that is sold individually.

Fixes these symptoms

Leaking
See more...

Installation Instructions

Louis from Kingwood, TX

Water leaking into Freezer from Ice Maker

Disregard previous.
1. Turn off water supply.
2. Unplug power cord.
3. Remove bottom Panel to access the Solenoid valve.
4. Remove the water lines from the Valve.
5. Remove the Valve from the refrigerator.
6. Remove the electrical connectors from the valve.
(make sure the new valve has the connector adaptors included) you will need them during installation.
7.Bend the new valve bracket inward about 45 degrees to clear the compressor coolant line.
8.Use a pair of pliers to braek away the plastic on the new valve for clearance.
9.If needed remove the compression fitings from the old water line installation as the new valve comes with the push and lock feature.
10.Install the bottom 2 water lines they are different sizes
11.Mount the new valve to refrigerator and tighten.
12.Install the ice maker water line to the top fitting on the valve.
13.Plug the power cord in & turn on the water supply,check for leaks and proper operation on the valve. Read more...

Your Price

$8.08

RCA Refrigerator SCR 8-18 TPT 1/4

★★★★★

1 Review

PartSelect Number PS1483094

Manufacturer Part Number WR01X10618

Installation Instructions

Vicki from APOLLO BEACH, FL

Anger motor died about a year ago, ice maker just quit so replaced both

The auger motor died because two of the screws attaching it had come loose so the motor wasn't properly aligned. Wasn't sure from diagram which was the right screw so ordered two different ones from the parts diagram.
PartSelect videos helped, watched several times until I felt comfortable. Pulled old icemaker first then removed assembly with anger motor, replaced motor per video and put assembly back in. Put new icemaker in and was done is a little over 30 minutes. Read more...

Your Price

$17.13

RCA Refrigerator Crusher Stationary Spacer

PartSelect Number PS297806

Manufacturer Part Number WR2X4138

Installation Instructions

Kelly from Canandaigua, NY

Ice Maker would not crush ice.

Removed tray from ref. Removed from cover from tray useing a screwdriver. Removed housing, took old parts out. Make sure you take the parts out in order and put new parts back in same order as old parts. Read more...

Your Price

$8.08

RCA Refrigerator 1/4 Tubing Nut

★★★★★

4 Reviews

PartSelect Number PS304401

Manufacturer Part Number WR57X57

This is a quarter tubing nut and is sold individually. The tubing nut works in conjunction with your refrigerator/freezer and is made entirely of plastic. The function of this part is to connect the lines that supply water to your ice maker and water dispenser. The most common reason or needing to replace this part is if fluid is leaking from the water line to your icemaker or water dispenser. The tools you will need to make this repair include a nut driver, a pair of pliers, and a screwdriver set.

Installation Instructions

Joe from Glenmoore, PA

Water leak from cracked Icemaker Water Line

This repair was done on a 13 year old fridge. Within the last several years I had to replace the Incoming Water Line twice, the line from the Inlet Water Valve to the Dispenser Water Reservoir, and this time the Icemaker Water line. These were all due to the plastic tubing hardening and becoming brittle from the heat of the compressor.

For this repair, I not only replaced the cracked Icemaker Line, I replaced the Incoming Water Line with copper, and replaced the Dispenser Water Reservoir. If you have a leak in one of the plastic water lines around the Valve Assembly, I recommend you do the same.

The Icemaker Water Line instructions from Stephen from Raleigh was very helful and complete.

I found Scot from Fort Collin's instructions on replacing the Reservoir very helpful too. Although I found his comment that one line was too short, to not be the case. In fact I had to trim both lines because they were too long.

Scott from South Lake Tahoe's suggestion to use the old Reservoir Lines to fish the new ones is good. I used duct tape to attach them together instead of drip irrigation fittings, and it worked fine. It helps to have somebody at the back of the fridge to pull the line while you push it from inside the fridge.

The line to the door connection can be accessed by removing the grill at the bottom of the front of the fridge.

Pretty easy repair. Thanks to the other contributors for the help! Read more...

Your Price

$28.59

RCA Refrigerator SCREW-PKG 12

PartSelect Number PS312722

Manufacturer Part Number WZ5X158D

Your Price

$8.08

RCA Refrigerator SCREW

PartSelect Number PS261539

Manufacturer Part Number WD2X5166

Size: 10-16 ab. * Part may differ in appearance, but functions same as original. Sold Individually.

Installation Instructions

Edward from E LONGMEADOW, MA

water leaking from under dishwasher

Water was leaking from under the GE dishwasher, but once we pulled it out, had apparently been going on for a little while. Turning the water off to the dishwasher made it stop, so it was happening even when the unit was not running, potentially indicating somewhere early in the path of the water to and into the machine.

Indeed, inspecting the water inlet vale showed a slow leak. Getting the replacement part was fine, and it fit the electrical, water inlet (existing 90-degree water inlet elbow), and water outlet connections just fine - but the original machine screws that held on the original water inlet valve did not work. It took a little research to figure out the new type of screw required, which was apparently a 10/16 Type AB, which seemed to be a less common type of sheet metal screw (with a point), as opposed to the original flat-ended machine screws. So, after ordering those separately (which were a bit expensive), it went together fine.

A note on the water inlet valve part just indicating the the threading on those parts has changed over time, so potentially ordering the screws to attach it might be worthwhile, would be good information to add about the water inlet valve. Read more...