Powermate Tiller Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Powermate Tiller Parts
Your Price
$40.96
In Stock
Powermate Tiller Extension Control Cable Reverse (1430mm)
PartSelect Number PS16723235
Manufacturer Part Number A203121
Your Price
$143.84
In Stock
Powermate Tiller Wheel, 13 Inch, Right
PartSelect Number PS10041115
Manufacturer Part Number A200809
This is a genuine OEM supplied replacement wheel that is specially manufactured for use on Powermate and Southland rear tine tillers. It is the right wheel that keeps the unit mobile for easy transportation. This high-quality wheel is sold individually, it consists of a metal rim and a durable rubber tire. Please note the left wheel and the hardware to secure these parts are all sold separately.
Installation Instructions
Willie from BLYTHEWOOD, SC
tiller tires lost air pressure both tires during tilling in gardening. .Try to replace innertube. No dice. Ordered wheel assembly completed.
After receiving wheel assembly, 5 minutes installation wheels installed. Back in business!
Read more...
Your Price
$22.03
On Order
Your Price
$77.82
In Stock
Powermate Tiller Forward Drive Belt 7Pk597
PartSelect Number PS10040892
Manufacturer Part Number A200512
Fixes these symptoms
- Drive system does not work
- See more...
Installation Instructions
Keith from MAGNOLIA, TX
Pull rope broke and starter cup spring lost
I follow a guy on YouTube alot of good videos on how to replace.
Read more...
Your Price
$32.99
In Stock
Powermate Tiller Recoil Starter Assembly
PartSelect Number PS10041100
Manufacturer Part Number A200783
This recoil starter assembly is supplied by the original manufacturer for use in tillers. It includes a plastic starter housing, metal mounting plate, starter pulley with recoil springs, grip handle, pull rope, and fasteners. When the starter rope/cord is pulled, the crankshaft rotates, and this begins the combustion process that allows the engine to run. If the starter assembly is not engaging or you have difficulties with pulling and retracting the rope rope, the most likely causes are a worn-down rope, damaged housing, or broken recoil spring. Loosen and remove the fasteners that hold the assembly to the engine. Pull off the assembly and position the new one in its place. Secure the assembly to the engine and test your equipment by pulling the rope to check that it can engage and start the equipment.
Fixes these symptoms
- Cannot pull starter cord out or engine will not turn over
- See more...
Your Price
$8.68
In Stock
Powermate Tiller Air Cleaner Element
PartSelect Number PS10040209
Manufacturer Part Number A101172
This authentic OEM air cleaner element, also known as an air filter, includes one paper filter surrounded by a foam pre-cleaner for use in a variety of outdoor power equipment. The foam pre-cleaner acts as the first protective barrier and traps larger particles to prevent them from clogging or tearing the paper filter. However, it is normal for the air filter to become clogged or torn due over time, due to accumulated dirt and debris, or due to prolonged use without replacement. A faulty air cleaner will result in poor engine performance, rough idling, hard starting, stalling, and increased fuel consumption. It is recommended to replace your air filter every 3-6 months for optimal performance. You can find the air cleaner housing near the carburetor or air intake on your equipment. Detach the housing cover and remove the faulty filter. Clean the housing and place the new air cleaner in position. Reattach the air cleaner cover to complete your repair.
Your Price
$7.51
In Stock
Powermate Tiller Drag Stake
PartSelect Number PS10041062
Manufacturer Part Number A200745
This drag stake, also known as a drag bar or drag shoe, is a genuine OEM replacement part used in tillers and cultivators. It is a metal bar with a pointed end, measuring 7 3/4 inches in length and 1 inch in width. The drag stake is responsible for helping to control the depth and direction of the machinery during use. It digs into the ground and provides resistance when the equipment is moving forward, which allows the tines/blades to effectively penetrate the soil. The drag stake can fail due to excessive wear, mechanical damage, or improper installation. A faulty drag stake will result in erratic and unstable movement, overspeeding, and inadequate weed and debris removal. Remove the fasteners that secure the drag stake to the equipment and slide it off. Slide out the old drag stake: Once the retaining hardware is removed, slide out the old drag stake from its mounting point. Align the new stake with the attachment points and reinstall the fasteners to secure it in place.
Your Price
$30.01
In Stock
Your Price
$21.36
In Stock
Powermate Tiller Fuel Line Filter Assembly
PartSelect Number PS17016767
Manufacturer Part Number A203641
Fuel Line Filter Assembly
Your Price
$60.76
In Stock
Powermate Tiller Reverse Drive Belt, 5Pk740
PartSelect Number PS10040908
Manufacturer Part Number A200528
A reverse drive belt is used within outdoor power equipment within the transmission to enable the reverse gear functionality and allow the user to move the equipment backward. This reverse drive belt is a 5Pk740 belt, meaning it is a multi-ribbed V-profile and measures 740mm in length/circumference. This belt is made of high-quality materials and connects directly to the reverse tensioner pulley in various models of tillers and is sold as an individual part. Over time and due to heat, friction, and stretching, this belt can eventually wear down. If you notice poor performance from your tiller when reversing or hear squealing and other unusual noises, inspect both drive belts for any signs of visible damage. To replace this drive belt, make sure the engine is cool and disengage the spark plug cap. Use a wrench to remove the belt guards on top and below the belt, if necessary. Then, using 2 wrenches, disconnect and remove the securing idler bolt and any washers, after which you can remove the belt through the bottom of the unit. Check to make sure the forward drive belt is in good condition before you install the new reverse drive belt. Pull the reverse drive belt up through the bottom of the unit and install it to the appropriate pulleys and tension wheel, followed by any washers and the securing bolt which you will need to tighten. Then simply replace the belt guards if applicable.
Powermate Tiller Appliance Types
Related Powermate Tiller Parts
- Tiller Bearings
- Tiller Belts
- Tiller Brackets and Flanges
- Tiller Caps and Lids
- Tiller Carburetors
- Tiller Control Cables
- Tiller Engines
- Tiller Filters
- Tiller Gears
- Tiller Handles
- Tiller Hardware
- Tiller Hoses and Tubes
- Tiller Knobs
- Tiller Manuals and Literature
- Tiller Pulleys
- Tiller Seals and Gaskets
- Tiller Spark Plugs
- Tiller Springs and Shock Absorbers
- Tiller Starters
- Tiller Switches
- Tiller Transmissions and Clutches
- Tiller Wheels and Rollers
Popular Powermate Tiller Models
Below are the most popular Powermate Tiller models we have. Enter your model number in the search box to find your model.
- PCV43 43cc Cultivator
- PFTT140BE Front Tine Tiller
- PRTT196E1 Rear Tine Tiller
- PRTT212 Rear Tine Tiller
- PRTT196E Rear Tine Tiller
- PFTT1421 11 In. 150cc Gas Front Tine Tiller
- PFTT142 11 In. 150cc Gas Front Tine Tiller
- PFTT150B Front Tine Tiller
- PFTT140 Front Tine Tiller
- PFTT1401 Front Tine Tiller
- P-RTT-196MD(E) 196cc Rear Tine Tiller
- P-FTT-160MD-E Front Tine Tiller
- P-RTT-196MD 196cc Rear Tine Tiller
- P-FTT-160MD Front Tine Tiller
