Models > 030432-0

030432-0 Troy-Bilt Generator - Overview

Sections of the 030432-0

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
★★★★★
★★★★★
(5)
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$19.31
  In Stock
Order within the next 10 hrs and your part ships today!
Cap, Fuel Gauge – Part Number: B4363GS
Cap, Fuel Gauge
★★★★★
★★★★★
(2)
PartSelect #: PS9314364
Manufacturer #: B4363GS
This OEM replacement fuel gauge cap is designed for use in generators. It comes in a cylindrical shape and has a built-in window to easily view the fuel levels without pulling out the entire cap. It i...
$45.30
  In Stock
Order within the next 10 hrs and your part ships today!
Line-Fuel – Part Number: 791745
Line-Fuel
PartSelect #: PS9140673
Manufacturer #: 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to tra...
$10.26
  In Stock
Order within the next 10 hrs and your part ships today!
Solenoid-Starter – Part Number: 691656
Solenoid-Starter
★★★★★
★★★★★
(3)
PartSelect #: PS9064363
Manufacturer #: 691656
A starter solenoid, also known as a starter relay, is an electrical component that is used within small engine systems to control the starter motor by engaging it when an ignition key is turned - acti...
$35.02
  In Stock
Order within the next 10 hrs and your part ships today!
Regulator-AVR Control – Part Number: 205858GS
Regulator-AVR Control
★★★★★
★★★★★
(3)
PartSelect #: PS9270265
Manufacturer #: 205858GS
The OEM voltage regulator or voltage control is a part used to regulate the voltage so it can provide the right amount of power to electrical components. It attaches inside the alternator housing. The...
$107.95
  In Stock
Order within the next 10 hrs and your part ships today!
Wheel – Part Number: 209322GS
Wheel
PartSelect #: PS8914262
Manufacturer #: 209322GS
$57.29
  In Stock
Order within the next 10 hrs and your part ships today!
Assembly, Holder, Brush – Part Number: 66386GS
Assembly, Holder, Brush
PartSelect #: PS9063496
Manufacturer #: 66386GS
The brush holder assembly in your generator keeps the brushes in place, allowing them to touch the rotor. It consists of a plastic brush holder and two carbon brushes with lead wires and attached spri...
$25.41
  In Stock
Order within the next 10 hrs and your part ships today!
Battery – Part Number: 193043GS
Battery
PartSelect #: PS8908509
Manufacturer #: 193043GS
$149.91
  In Stock
Order within the next 10 hrs and your part ships today!
Retaining Ring – Part Number: 703976
Retaining Ring
PartSelect #: PS11829825
Manufacturer #: 703976
$4.99
  In Stock
Order within the next 10 hrs and your part ships today!
Switch, Set Exercise – Part Number: 87799GS
Switch, Set Exercise
PartSelect #: PS9160620
Manufacturer #: 87799GS
$5.71
  In Stock
Order within the next 10 hrs and your part ships today!
Cover, Rbc Plastic With Cap – Part Number: 195422GS
Cover, Rbc Plastic With Cap
PartSelect #: PS8909587
Manufacturer #: 195422GS
This rear bearing cover is designed to protect and insulate the rear bearing of the engine. It is an authentic OEM replacement part with a diameter of approximately 8 inches. It comes with a center/du...
$14.51
  In Stock
Order within the next 10 hrs and your part ships today!
Screw, M5 - .8 X 10 Taptite – Part Number: 74908GS
Screw, M5 - .8 X 10 Taptite
PartSelect #: PS9116859
Manufacturer #: 74908GS
$3.99
  In Stock
Order within the next 10 hrs and your part ships today!

Questions And Answers for 030432-0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 030432-0

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Parts Used:
Solenoid-Starter
  • Bruce from CARNATION, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
10 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Parts Used:
Fuel Valve W/Bushing
  • James from PICAYUNE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank
Parts Used:
Fuel Valve W/Bushing
  • Alan from RADFORD, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!