Models > 030298-0-580325650

030298-0-580325650 Craftsman Generator - Overview

Sections of the 030298-0-580325650

[Viewing 4 of 4]
Alternator Diagram and Parts List for Craftsman Generator
Alternator
Control Panel Diagram and Parts List for Craftsman Generator
Control Panel
Main Unit Diagram and Parts List for Craftsman Generator
Main Unit
Wheel Kit Diagram and Parts List for Craftsman Generator
Wheel Kit
Keep searches simple, eg. "belt" or "pump".
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
★★★★★
★★★★★
(5)
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$19.31
  In Stock
Order within the next 8 hrs and your part ships today!
Line-Fuel – Part Number: 791745
Line-Fuel
PartSelect #: PS9140673
Manufacturer #: 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to tra...
$10.26
  In Stock
Order within the next 8 hrs and your part ships today!
Solenoid-Starter – Part Number: 691656
Solenoid-Starter
★★★★★
★★★★★
(3)
PartSelect #: PS9064363
Manufacturer #: 691656
A starter solenoid, also known as a starter relay, is an electrical component that is used within small engine systems to control the starter motor by engaging it when an ignition key is turned - acti...
$35.02
  In Stock
Order within the next 8 hrs and your part ships today!
Assembly, Brush Holder – Part Number: 91825GS
Assembly, Brush Holder
★★★★★
★★★★★
(1)
PartSelect #: PS9157810
Manufacturer #: 91825GS
$59.96
  In Stock
Order within the next 8 hrs and your part ships today!
Wheel – Part Number: 209322GS
Wheel
PartSelect #: PS8914262
Manufacturer #: 209322GS
$57.29
  In Stock
Order within the next 8 hrs and your part ships today!
E-Ring – Part Number: 703977
E-Ring
PartSelect #: PS10000220
Manufacturer #: 703977
The OEM E-Ring is a silver metal part used to secure the wheel on the shaft. If broken, the wheel may fall off, and the part must be replaced. It is rated as "Easy" to install and requires pliers and a screw driver.
$4.99
  In Stock
Order within the next 8 hrs and your part ships today!
Support, Leg – Part Number: B1764GS
Support, Leg
★★★★★
★★★★★
(1)
PartSelect #: PS9184762
Manufacturer #: B1764GS
  No Longer Available
Breaker, Circuit, 20A – Part Number: 202030GS
Breaker, Circuit, 20A
PartSelect #: PS8914391
Manufacturer #: 202030GS
$105.26
  In Stock
Order within the next 8 hrs and your part ships today!
Switch, Set Exercise – Part Number: 87799GS
Switch, Set Exercise
PartSelect #: PS9160620
Manufacturer #: 87799GS
$5.71
  In Stock
Order within the next 8 hrs and your part ships today!
Cover, Rbc Plastic With Cap – Part Number: 195422GS
Cover, Rbc Plastic With Cap
PartSelect #: PS8909587
Manufacturer #: 195422GS
This rear bearing cover is designed to protect and insulate the rear bearing of the engine. It is an authentic OEM replacement part with a diameter of approximately 8 inches. It comes with a center/du...
$14.51
  In Stock
Order within the next 8 hrs and your part ships today!
Screw, M5 - .8 X 10 Taptite – Part Number: 74908GS
Screw, M5 - .8 X 10 Taptite
PartSelect #: PS9116859
Manufacturer #: 74908GS
$3.99
  In Stock
Order within the next 8 hrs and your part ships today!
Gasket-Exhaust – Part Number: 695398
Gasket-Exhaust
PartSelect #: PS9295033
Manufacturer #: 695398
$7.84
  In Stock
Order within the next 8 hrs and your part ships today!
View More
Back to Top

Questions And Answers for 030298-0-580325650

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the 030298-0-580325650

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Parts Used:
Solenoid-Starter
  • Bruce from CARNATION, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
10 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Parts Used:
Fuel Valve W/Bushing
  • James from PICAYUNE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank
Parts Used:
Fuel Valve W/Bushing
  • Alan from RADFORD, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top