MTD Tiller Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
MTD Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular MTD Tiller Parts

Air Filter – Part Number: 753-05996
Your Price
$3.99
   In Stock
MTD Tiller Air Filter
PartSelect Number PS9117898
Manufacturer Part Number 753-05996
13" Articulating Tine – Part Number: 742-0305A-0637
Your Price
$22.10
   In Stock
MTD Tiller 13" Articulating Tine
PartSelect Number PS10007424
Manufacturer Part Number 742-0305A-0637
Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451
Your Price
$4.07
   In Stock
MTD Tiller Carriage Bolt, 5/16-18 x .75
PartSelect Number PS10001568
Manufacturer Part Number 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Chute Flange Keeper – Part Number: 731-0851A
Your Price
$4.49
   In Stock
MTD Tiller Chute Flange Keeper
★★★★★
★★★★★
1 Review
PartSelect Number PS10005747
Manufacturer Part Number 731-0851A
This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.
Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063
Your Price
$4.10
   In Stock
MTD Tiller Nut, Flange Lock, 5/16-18, Grf
PartSelect Number PS9092936
Manufacturer Part Number 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.
Fuel Line and Filter – Part Number: 791-682039
Your Price
$16.80
   In Stock
MTD Tiller Fuel Line and Filter
★★★★★
★★★★★
2 Reviews
PartSelect Number PS10014709
Manufacturer Part Number 791-682039
This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.
Fixes these symptoms
Installation Instructions
Howard from NEWBURGH, IN
Dry rot hoses
Took off old and new parts went right in place. Read more...
Cable Barrel Holder – Part Number: 946-0605
Your Price
$4.54
   In Stock
MTD Tiller Cable Barrel Holder
★★★★★
★★★★★
1 Review
PartSelect Number PS9167431
Manufacturer Part Number 946-0605
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?
Primer and Hose Assembly – Part Number: 791-683974B
Your Price
$22.96
   In Stock
MTD Tiller Primer and Hose Assembly
PartSelect Number PS10014772
Manufacturer Part Number 791-683974B
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.
Fixes these symptoms
Bearing .62" I.D. x 1.38" O.D. x .437" Thk. – Part Number: 941-0155
Your Price
$25.45
   In Stock
MTD Tiller Bearing .62" I.D. x 1.38" O.D. x .437" Thk.
PartSelect Number PS9167498
Manufacturer Part Number 941-0155
This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber. This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. You will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out. Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.
Installation Instructions
Howard from NEWBURGH, IN
Dry rot hoses
Took off old and new parts went right in place. Read more...
Fuel Return Line – Part Number: 791-181086
Your Price
$7.14
   In Stock
MTD Tiller Fuel Return Line
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9137685
Manufacturer Part Number 791-181086
The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.

MTD Tiller Appliance Types

Back to Top

Related MTD Tiller Parts

Back to Top

Popular MTD Tiller Models

Below are the most popular MTD Tiller models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More
Back to Top