MTD String Trimmer Parts

Fuel Tank Assembly W/Fuel Lines Incl. 29 – Part Number: 753-06797

Your Price

$22.11

MTD String Trimmer Fuel Tank Assembly W/Fuel Lines Incl. 29

★★★★★

1 Review

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Fuel Tank Assembly – Part Number: 753-06183

Your Price

$13.77

MTD String Trimmer Fuel Tank Assembly

★★★★★

2 Reviews

PartSelect Number PS10009586

Manufacturer Part Number 753-06183

This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines are clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Erik from ROBERTSDALE, AL

Fuel line broke

Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done. Read more...

Line trimmer cutting head assembly – Part Number: 841-013303S

Your Price

$15.69

MTD String Trimmer Line trimmer cutting head assembly

★★★★★

1 Review

PartSelect Number PS16583608

Manufacturer Part Number 841-013303S

Installation Instructions

Randall from TREMONT, IL

Plastic bump head housing cracked

Unscrewed the old (LEFT HAND THREADS), screwed on the new. Done!!! Read more...

Fuel Line and Filter – Part Number: 791-682039

Your Price

$16.80

MTD String Trimmer Fuel Line and Filter

★★★★★

2 Reviews

PartSelect Number PS10014709

Manufacturer Part Number 791-682039

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

Fixes these symptoms

Will Not Start
See more...

Bump Head Knob Assembly – Part Number: 791-153066B

Your Price

$13.42

MTD String Trimmer Bump Head Knob Assembly

★★★★★

2 Reviews

PartSelect Number PS9306452

Manufacturer Part Number 791-153066B

This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this part may break due to wear, and you will know it is broken because it will completely stop functioning. A troubleshooting tip is to tap the part on theg round to see if the cutting line advances. This is an easy repair to make, and does not require any tools. You will need to look for the bump head attachment point on the bottom of the cutting head assembly.

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...

Primer and Hose Assembly – Part Number: 791-683974B

Your Price

$22.96

MTD String Trimmer Primer and Hose Assembly

PartSelect Number PS10014772

Manufacturer Part Number 791-683974B

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

Fixes these symptoms

Will Not Start
See more...

Starter housing assembly – Part Number: 753-06314

Your Price

$30.80

MTD String Trimmer Starter housing assembly

PartSelect Number PS10009640

Manufacturer Part Number 753-06314

Bump Head Knob Assembly – Part Number: 791-181468B

Your Price

$16.28

MTD String Trimmer Bump Head Knob Assembly

★★★★★

3 Reviews

PartSelect Number PS10013974

Manufacturer Part Number 791-181468B

This OEM bump head knob assembly, known simply as the bump head assembly sometimes, advances the line on your trimmer in the spool. Black in color, it is made of plastic and steel and is sold individually. Tap your trimmer on the ground to see if the cutting line advances to determine if there is a problem with this part. If it will no longer feed, it is likely that this part needs to be replaced. Most of our customers rated this repair as easy. You can attach your new part to the cutting head with no special tools required to complete the repair.

Fuel Return Line – Part Number: 791-181086

Your Price

$7.14

MTD String Trimmer Fuel Return Line

★★★★★

2 Reviews

PartSelect Number PS9137685

Manufacturer Part Number 791-181086

The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...