Craftsman Lawn Mower Parts

Your Price

$6.21

Craftsman Lawn Mower Bearing

★★★★★

3 Reviews

PartSelect Number PS9006914

Manufacturer Part Number 532009040

The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft. Over time, the part may become worn and damaged, which you will notice if you experience a squealing or grinding sound from the wheel in question, or you notice the wheel is sloppy on the shaft. You will need a hammer and punch to complete this repair, which most of our customers rated as easy. Make sure you tap the new bearing into place evenly inside the tire rim.

Installation Instructions

robert from EUREKA, CA

transaxle rotated forward on 2015 Husqvarna YT42DXLS

2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair.

HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.

HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.

HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.

HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.

HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.

HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...

Cap Axle Black 1 50 x 1 00 – Part Number: 532104757

Your Price

$3.99

Craftsman Lawn Mower Cap Axle Black 1 50 x 1 00

★★★★★

1 Review

PartSelect Number PS9007667

Manufacturer Part Number 532104757

This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.

Installation Instructions

Anthony from OLIVEHILL, TN

Wheel bushings were bad

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...

Ring Klip Number T5304-75 – Part Number: 812000029

Your Price

$3.99

Craftsman Lawn Mower Ring Klip Number T5304-75

★★★★★

1 Review

PartSelect Number PS9143890

Manufacturer Part Number 812000029

The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.

Installation Instructions

Anthony from OLIVEHILL, TN

Wheel bushings were bad

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...

Grass Catcher Frame – Part Number: 647-04271-0637

Your Price

$37.15

Craftsman Lawn Mower Grass Catcher Frame

★★★★★

1 Review

PartSelect Number PS9988561

Manufacturer Part Number 647-04271-0637

Bolt and Washer Assembly – Part Number: 532193003

Your Price

$8.71

Craftsman Lawn Mower Bolt and Washer Assembly

PartSelect Number PS9020856

Manufacturer Part Number 532193003

This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.

Installation Instructions

Robert from WHITMAN, MA

the head blew a vaulve guide destoying push rods

about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine Read more...

Your Price

$8.27

Craftsman Lawn Mower Aluminum Push Rod

PartSelect Number PS9073139

Manufacturer Part Number 690982

This is a replacement push rod for your lawn tractor engine. It is made of aluminum and is the push rod used for the exhaust valve. Occasionally, the push rod in your engine can become damaged, and will need to be replaced before your engine runs at full capacity. This push rod is approximately 6 inches in length, and is an OEM part sourced directly from the manufacturer.

Your Price

$21.00

Craftsman Lawn Mower Grassbag Frame

PartSelect Number PS11824788

Manufacturer Part Number 585054702

Your Price

$29.05

Craftsman Lawn Mower Drive Control

★★★★★

2 Reviews

PartSelect Number PS11982294

Manufacturer Part Number 731-09922A

Rear Axle Assembly – Part Number: 911-04144B

Your Price

$33.18

Craftsman Lawn Mower Rear Axle Assembly

★★★★★

2 Reviews

PartSelect Number PS10023414

Manufacturer Part Number 911-04144B

Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate. This part replaces part numbers 911-04144 and 911-04144A. Wear work gloves to protect your hands when installing this part.