Whirlpool Range Circuit Boards and Touch Pads

Your Price

$205.21

Whirlpool Range Cntrl-elec

★★★★★

1 Review

PartSelect Number PS16620223

Manufacturer Part Number W11544349

This electronic control board is a genuine OEM replacement part designed for ranges and ovens. The control board is responsible for regulating the temperature and controlling the heat within the oven. If your oven is not maintaining the correct temperature or is malfunctioning, the issue may lie with the electronic control board. This component monitors the temperature settings and ensures that the oven functions according to the selected temperature, providing you with consistent and reliable cooking results. To install, begin by unplugging the range or shutting off the house circuit breaker to ensure safety. The control board is typically located behind the control panel of the oven. After carefully removing the panel, disconnect the faulty control board and replace it with the new one, making sure to reconnect the wiring in the exact same configuration. Once the new board is securely installed, test the oven to ensure it heats up and operates correctly.

Your Price

$197.66

Whirlpool Range Cntrl-elec

PartSelect Number PS16660474

Manufacturer Part Number W11567348

Installation Instructions

Christoph from PORT ST LUCIE, FL

F1 E0 CODE.

UNPLUG RANGE. PULL OUT AND REMOVE TOP REAR SHEET METAL COVER. UNPLUG CONTROL UNIT, AND REMOVE AS AN ASSEMBLY. INSTALL NEW ELECTRICAL CONTROL BOARD / DISPLAY UNIT WITH NEW P/N: W11567348. REINSTALL SHEET METAL COVER, PLUG IN. TEST. OPS CHECK GOOD. Read more...

Your Price

$205.21

Whirlpool Range Electronic Control Board

PartSelect Number PS16555254

Manufacturer Part Number W11536793

The Oven Control Board is a crucial component for managing the temperature and heat levels in your oven, ensuring consistent and accurate cooking. This genuine OEM replacement part is designed to fit a variety of ranges, and it plays a key role in regulating the oven’s functions. The control board monitors the oven’s internal temperature and adjusts the heat accordingly, allowing for precise cooking and baking results. When replacing the control board, it’s important to verify compatibility with your specific oven model, as slight variations may exist. Always unplug the range or shut off the house circuit breaker before starting any repairs to avoid electrical hazards. Be sure to wear work gloves to protect your hands from sharp edges during installation, and carefully follow the manufacturer's instructions for proper installation. This replacement part ensures your oven operates efficiently, bringing convenience and accuracy to your cooking.

Your Price

$269.13

Whirlpool Range Cntrl-elec

PartSelect Number PS11765771

Manufacturer Part Number W10894098

This oven clock control is a genuine OEM replacement part designed for ranges and ovens. It functions as the central control unit, regulating the oven temperature and heat cycles, and provides the necessary interface to set cooking times. If your oven is not responding to temperature settings or the clock display is malfunctioning, it may be time to replace the control board. This part ensures the proper functionality of your oven, allowing you to set precise cooking times and temperatures, which are crucial for optimal cooking results. Installation involves first unplugging the range or turning off the house circuit breaker to ensure safety. The control board is typically located behind the control panel. After removing the panel, disconnect the old board and carefully install the new one, ensuring that all wiring is correctly connected according to the manufacturer’s specifications. Once the new board is securely in place, reconnect the power and test the oven to confirm that it is functioning as expected.

Your Price

$172.13

Whirlpool Range Electronic Control Board - Black

★★★★★

1 Review

PartSelect Number PS11756247

Manufacturer Part Number WPW10556710

This genuine OEM replacement control board is used on oven ranges. The oven control board WPW10556710 monitors the temperature and controls the oven heat.

Fixes these symptoms

Touchpad does not respond
See more...

Your Price

$154.11

Whirlpool Range Switch Membrane - Black

★★★★★

4 Reviews

PartSelect Number PS11750390

Manufacturer Part Number WPW10207928

Also known as Touchpad.

Fixes these symptoms

Touchpad does not respond
Will not program
See more...

Installation Instructions

Ken from Cedar City, UT

Number touch pad would only work on #4 and #1

First turn off circuit breaker to stove. Slide the stove out about 4 inches from the counter to expose the two phillips head screws, one on the left side and one on the right side of touch panel. Take out screws. Then take out four Phillip head screws on the bottom side of panel, this will set panel loose from stove. Carefully pull up touch pad (switch membrane) from control panel; it is sticky glued in place. Disconnect ribbon cables on switch membrane from control panel by depressing cable locks while pulling firmly. Remove switch membrane. Clean area before installing new membrane. Reassemble turn on power and you are done. Read more...

Your Price

$148.15

Whirlpool Range Switch Membrane With Touchpad - Black

PartSelect Number PS11750393

Manufacturer Part Number WPW10207933

Fixes these symptoms

Touchpad does not respond
See more...

Your Price

$197.70

Whirlpool Range Electronic Control Board

PartSelect Number PS16660475

Manufacturer Part Number W11567368

This is a genuine replacement Oven Control Board. This part monitors the temperature and controls the oven heat.

Installation Instructions

RICK from LA PLATA, MD

F6 E1 Error on Display. Oven overheats; broiler element is on constantly in BAKE mode.

Repair is fairly easy. Turn off power source or unplug the range. Pull the range out to access the rear sheet metal panels; there's two of them, large upper and smaller lower one (that covers the A/C power connections). Remove the two screws in the bottom panel first and put it aside. Before removing the screws on the upper panel, take note of how the top vertical edge of the panel "tabs" are inserted underneath the stationary top of the range. Remove either five or six screws on each side of the panel and put it aside. Now the rear of the control board is accessible. All of its connectors are color-coded, although its best to shoot a pic of it before removing them. After removing all of the connectors, there's one mounting screw on each side of the board; remove them and pull out the board. Now, install the new control board, making sure all of the connectors are properly secured. Restore power to the range; make sure the problem is resolved (before reinstalling the rear panels) by entering the BAKE mode. Pre(heat) cycle begins to default 350-deg temp; should take 8-9 mins from a cold oven to reach 350-deg. If it passes the test, shut off power and reinstall rear panels beginning with the UPPER one, paying attention to the "tabs." Then install the lower panel, reapply power, slide the range back into its home base making sure the anti-tip bracket is properly engaged. That's it. Read more...

Your Price

$208.28

Whirlpool Range Electronic Control Board

PartSelect Number PS12704743

Manufacturer Part Number W11308431

The electronic control board is a critical component in modern ranges, responsible for regulating oven functions, temperature settings, and overall operation. It acts as the central command center, processing user inputs and sending signals to control the heating elements. If your oven is experiencing temperature inconsistencies, failing to turn on, or displaying error codes, a malfunctioning control board could be the issue. Replacing this part can restore proper oven functionality. Before installation, always disconnect the power supply to prevent electrical hazards. Ensure compatibility with your appliance model before purchasing.