Weed Eater Blower Parts | Same Day Shipping | Millions of Parts
You are logged in as a customer LOG OUT

Hello!

You're visiting the PartSelect site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

Popular Weed Eater Blower Parts

Engine Fuel Filter – Part Number: 530095646
Your Price
$4.78
Engine Fuel Filter
(2)
PartSelect Number PS9285148
Manufacturer Part Number 530095646
This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel tank and disconnect the spark plug wire before beginning the repair.
Fixes these symptoms
Engine stops after a few seconds or minutes
Will Not Start


Installation Instructions
Mark from LYNDONVILLE, NY says,

Deterioration of fuel line system
Removed the top cover (T25 torx), and side cover (T25 torx) with recoil starter. Drained all fuel, and removed all pieces of fuel old fuel line and the weighted filter from inside the tank by shaking ...read more

Fuel Line – Part Number: 530069247
Your Price
$5.97
Fuel Line
(4)
PartSelect Number PS9472280
Manufacturer Part Number 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged, and it can become brittle as well. When the fuel line is badly clogged or cracked, fuel can leak out and it can make it difficult to start or run the engine. To replace the fuel line, carefully disconnect the old line from the carburetor and from the fuel grommet, then replace it with the new line. This fuel line is 25 inches in length and is made of clear plastic. The fuel line is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Engine stops after a few seconds or minutes
Will Not Start


Installation Instructions
Mark from LYNDONVILLE, NY says,

Deterioration of fuel line system
Removed the top cover (T25 torx), and side cover (T25 torx) with recoil starter. Drained all fuel, and removed all pieces of fuel old fuel line and the weighted filter from inside the tank by shaking ...read more

Tank Purge Line – Part Number: 530069216
Your Price
$5.97
Tank Purge Line
(2)
PartSelect Number PS9472264
Manufacturer Part Number 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the fuel tank after the primer bulb has been pushed. If the line is cracked or damaged, it can affect engine performance and will need to be replaced. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Will Not Start


Installation Instructions
Mark from LYNDONVILLE, NY says,

Deterioration of fuel line system
Removed the top cover (T25 torx), and side cover (T25 torx) with recoil starter. Drained all fuel, and removed all pieces of fuel old fuel line and the weighted filter from inside the tank by shaking ...read more

Vacuum Bag Kit – Part Number: 530402533
Your Price
$44.28
Vacuum Bag Kit
(3)
PartSelect Number PS9971875
Manufacturer Part Number 530402533
Fixes these symptoms
No Symptoms for this part
Wire Harness – Part Number: 545124301
Your Price
$17.95
Wire Harness
(2)
PartSelect Number PS9977151
Manufacturer Part Number 545124301
Fixes these symptoms
No Symptoms for this part
Piston Ring – Part Number: 545154001
Your Price
$4.78
Piston Ring
(1)
PartSelect Number PS9482765
Manufacturer Part Number 545154001
Fixes these symptoms
No Symptoms for this part
Vacuum Bag Assembly w/ Strap – Part Number: 530095564
Your Price
$33.51
Vacuum Bag Assembly w/ Strap
PartSelect Number PS9971436
Manufacturer Part Number 530095564
This OEM Vacuum Bag holds grass and leaf clippings when the blower is switched to vacuum mode, and is attached to the exit port. It is constructed of white fabric. If broken due to wear/fatigue it will no longer be able to hold clippings and should be replaced. Refer to your make, model and diagrams to see if this is the right part for your machine.
Fixes these symptoms
No Symptoms for this part
Rope (3 ft.) – Part Number: 530069232
Your Price
$7.17
Rope (3 ft.)
PartSelect Number PS9472269
Manufacturer Part Number 530069232
The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installation is rated as "Easy" by customers and requires a screw driver, pliers, and torx screwdriver. If the rope breaks it should be replaced. Refer to your make, model and diagram to ensure this rope is right for your machine.
Fixes these symptoms
No Symptoms for this part
Starter Spring – Part Number: 545008010
Your Price
$7.17
Starter Spring
PartSelect Number PS9482319
Manufacturer Part Number 545008010
The Starter Spring is a metal spring used to restract the rope after you pull it to start the engine. Installation of this OEM part is rated as "Medium" difficulty and requires a screwdriver, nutdriver, and torx bit. The part is installed inside the recoil housing. If broken, the rope will not retract and the part must be replaced.
Fixes these symptoms
No Symptoms for this part
Fuel Cap (w/ retainer) – Part Number: 530014347
Your Price
$8.37
Fuel Cap (w/ retainer)
(1)
PartSelect Number PS9468748
Manufacturer Part Number 530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic. Because of everyday fatigue and wear, the cap can become damaged over time and must be replaced. You will know if it is time to replace your fuel cap if you notice visible damage or experience fuel leaking from it. You can make this repair by hand, just attach the cap directly back onto the fuel tank. Most of our customers found this repair very easy.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Anthony from ST GEORGE, UT says,

Weak spark. Multiple fuel leaks/ no start.
Pull #25 torx 4mm screws until you find the ignition module. Replace it, use lock tight, gap with a paper credit card. Reassemble. Replace cap and fuel lines. Pump and pull till it blows the carb ...read more

Organize Your Home in a Snap!

The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!

"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed."
- Clever Jeff