Washer Drums and Tubs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Washer Drums and Tubs
Washer Drum Baffle
PartSelect Number PS11751921
Manufacturer Part Number WPW10283356
Sold individually. Baffle only. No screws are required. The baffle has hooks that slide onto the basket.
Fixes these symptoms
- Will not agitate
- See more...
Your Price
$63.71
In Stock
Washer Baffle
PartSelect Number PS11744968
Manufacturer Part Number WP8182233
This part moves the clothes around inside your dryer/washer and helps to direct the flow of hot air during the drying cycle. Sold individually.
Fixes these symptoms
- Marks left on clothes
- Will not agitate
- See more...
Installation Instructions
Carole from Colorado City, AZ
Washer baffle broke off
I snapped the piece into place. It took two people to do the job....one to hold the washer basket from moving and the other to snap it in place. It did take some hard pushing but it worked out great!!!! The repair man quoted me $130.00 for the installation only. And I installed myself it in less than 5 minutes!
Read more...
Washer Drum Baffle
PartSelect Number PS3418909
Manufacturer Part Number 137263600
Sold individually. Baffle only.
Washer Baffle
PartSelect Number PS11756653
Manufacturer Part Number WPW10597205
The washer drum baffle is an essential component that lifts and tumbles clothes inside the drum during the wash cycle, ensuring even distribution and thorough cleaning. This genuine OEM replacement part is designed for select washing machines and helps maintain optimal performance by promoting efficient water extraction and preventing laundry from clumping. Over time, the baffle may become loose, cracked, or damaged, leading to issues such as uneven washing, excessive noise, or poor spin efficiency. If your washer is not tumbling clothes properly or you notice rattling sounds during operation, replacing the drum baffle can help restore its functionality. For safe installation, always unplug the washer and wear protective gloves. Since similar parts may have slight differences in size and shape, verify compatibility with your appliance before ordering.
Washer Drum Baffle
PartSelect Number PS3408272
Manufacturer Part Number 134952702
Sold individually.
Your Price
$90.43
In Stock
Washer Inner Tub Base Hub
PartSelect Number PS273296
Manufacturer Part Number WH45X10027
This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.
Fixes these symptoms
- Will not agitate
- See more...
Installation Instructions
Joe from Lucedale, MS
The Hub Under the Spinner basket broken/ Deteriorated
Removed front cover, Control panel, top Cover, slasher unit, all very smiple stuff. the hub was broken and the spinner basket came right out. One half Hub attached to Spinner, Other half attached to Hub drive shaft. removing the Hub nut was the hard part. tried impack & socket, No luck. in removal. Had to usr Hammer & Chisel and bust Old Alum. Nut off. Clean up and replace parts. OK. Had to remove water pump and clear debree that went in pump when spinner Hub broke off . the spinner also bursted a crack in the outer poly tube when it cam apart.. Sanded the dmage area and Patched with a good coat of JB Weld. machine is working Like new. The parts all worked Great. the break down Chart was a great Help to get the right parts needed. Thanks
Read more...
Washer Inner Tub Basket
PartSelect Number PS3495137
Manufacturer Part Number W10389328
The spin basket (W10389328) is the perforated tub used to hold your laundry inside your washing machine. If your washer is vibrating excessively or not spinning properly, the spin basket may need replacement. This OEM Whirlpool part is designed to fit your washing machine perfectly. Easy to install, this part requires less than an hour to replace. Remember to unplug your washer and shut off the water supply before installation, and wear work gloves for safety. Verify your washing machine's model number for compatibility before buying.
Washer Hub
PartSelect Number PS2581262
Manufacturer Part Number W10324651
The washing machine tub hub kit helps secure the spin basket to the spin shaft, enabling smooth rotation. It includes the drive block, drive hub, tub nut, and necessary hardware. Verify fitment before ordering. Unplug the washer before installation and use protective gloves.
Fixes these symptoms
- Shaking and Moving
- Spinning Issues
- Will not agitate
- See more...
Washer Baffle
PartSelect Number PS11751113
Manufacturer Part Number WPW10250572
Installation Instructions
Doug from ROCHESTER HLS, MI
The part was made wrong and did not fit.
The plastic tabs were too large to fit into the washer's slotted hole in the washer cage. I initially bought this part from a PartSelect competitor and it was made wrong as well. Whirlpool themselves showed this part on back order so the faulty part originated in a Whirlpool order to a vendor. The reason for this reply is that PartSelect resolved this bad part issue within 2 hours and 1 phone call. The competitor has not resolved anything yet in 3 weeks and 5 emails with image proof.
Read more...