Uni Freezer Trays and Shelves
Find your partEnter your model number or a part number and click "Search"
Popular Uni Freezer Trays and Shelves
Door Shelf End Cap Set - Left and Right Side
PartSelect Number PS469917
Manufacturer Part Number 5303925377This assembly is the door shelf end cap set for the left and right side of your refrigerator. The function of the door shelf end cap is to attach the inner door liner to the door shelf rail. This will then hold the door shelf rail in place and keep it stable. To make this installation you may need a pair of pliers, other than that the parts will easily snap in and out of place. These pieces are white and measure almost 2 inches long, 1 inch high, and 1.5 inches wide.
STEPHEN from CAMP VERDE, AZ
Broken Slelf Ends In FreezerInserted end pieces and remounted old refrigerator bar Read more...
Shelf Support - Left Side
PartSelect Number PS977266
Manufacturer Part Number 297001600This is a shelf support for the left side of a freezer. It is used to help support the inside of the shelf from both sides. *Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is unstable, replacing this part could be the solution. Make sure to unplug the refrigerator or freezer from the power source before beginning this replacement project and safely store food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.
shari from west sand lake, NY
Plastic shelf supports brokenNeeded to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm! Read more...
Shelf Support - Right Side
PartSelect Number PS977265
Manufacturer Part Number 297001500This is a shelf support for freezers. It is used to help hold the inside of the shelf from both sides (left and right.) Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is not leveled and is unstable, changing this part could be the solution. Make sure to unplug the refrigerator from the power source before beginning this replacement project and safely store your food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.
Gregory from NEW ORLEANS, LA
Stop basket and right side shelf support were broken.Used needle nosed pliers to twist and pull out remainder of broken parts (regular pliers would work, fingers might). Used fingers to insert replacements. So, simple, so glad I did it! Read more...
Wire Shelf - White
PartSelect Number PS3506332
Manufacturer Part Number 297367400Sold individually.
PartSelect Number PS976290
Manufacturer Part Number 216951600
Lower Freezer Basket
PartSelect Number PS817177
Manufacturer Part Number 216867400
PartSelect Number PS2368241
Manufacturer Part Number 297119801
Wire Shelf - White
PartSelect Number PS3655234
Manufacturer Part Number 297367500Sold individually.
PartSelect Number PS425924
Manufacturer Part Number 216474600This part is found in freezers. The stud may have broken over time and may no longer be supporting the shelf. If your shelf is not staying in place or you are not able to adjust heights, it may be due to the support being broken. To complete this repair, you will need to open the fridge and remove the drawer and the shelf. To remove the old stud, you will need a 3/4-inch wrench to twist it off. The new part should push into place and will need to be turned with your wrench to be secured into place.