Troy-Bilt Pressure Washer Parts | Same Day Shipping | Millions of Parts
You are logged in as a customer LOG OUT

Hello!

You're visiting the PartSelect site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

Popular Troy-Bilt Pressure Washer Parts

Fuel Valve W/Bushing – Part Number: 192980GS
Your Price
$17.35
Fuel Valve W/Bushing
3 Reviews
PartSelect Number PS8911051
Manufacturer Part Number 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor. This part is found on the underside of the fuel tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
Will Not Start


Installation Instructions
James from PICAYUNE, MS says,

Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes....read more

Kit, Handle Fastening – Part Number: B2203GS
Your Price
$5.14
Kit, Handle Fastening
PartSelect Number PS9181264
Manufacturer Part Number B2203GS
Fixes these symptoms
No Symptoms for this part
Kit-Retainer Clips – Part Number: 195964GS
Your Price
$4.42
Kit-Retainer Clips
PartSelect Number PS8907531
Manufacturer Part Number 195964GS
Fixes these symptoms
No Symptoms for this part
Thermo Relief – Part Number: 208673GS
Your Price
$13.87
Thermo Relief
PartSelect Number PS9270416
Manufacturer Part Number 208673GS
Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a kit or assembly, and is sold individually. When malfunctioning, the Thermo Relief Valve will open on a regular basis, which can cause damage to your pump. If it is opening often or on a regular basis, replace it to protect your pump from damage. You will need a socket set, a wrench set, and pliers to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
No Symptoms for this part
Kit, Vibe Mount – Part Number: 192310GS
Your Price
$9.45
Kit, Vibe Mount
1 Review
PartSelect Number PS8910434
Manufacturer Part Number 192310GS
Frequently referred to as a Vibration Kit, this Vibe Mount Kit includes two durable rubber mounts, two metal washers, two bolts, and two locknuts. This kit is sourced directly from the manufacturer for use in pressure washers and attaches to the base of the unit to reduce vibration when the engine is on. When this part needs to be replaced, you will notice more vibrations than normal coming from the unit. This part will become worn through regular use of the machine. You will need a socket set to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
No Symptoms for this part
Kit, Chemical Inject – Part Number: 192914GS
Your Price
$24.53
Kit, Chemical Inject
1 Review
PartSelect Number PS8911045
Manufacturer Part Number 192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers. If the cleaning solution will not dispense, it is possible that you need a new Chemical Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Carl from ARCADIA, FL says,

The copper fitting on the chemical injection broke.
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything wor...read more

Filter, Garden Hose – Part Number: B2384GS
Your Price
$4.18
Filter, Garden Hose
PartSelect Number PS9181874
Manufacturer Part Number B2384GS
Fixes these symptoms
No Symptoms for this part
Fitting – Part Number: 201497GS
Your Price
$26.33
Fitting
7 Reviews
PartSelect Number PS8911836
Manufacturer Part Number 201497GS
This is a genuine OEM sourced component which is specially designed for Craftsman pressure washers. It is an identical replacement for a missing or damaged outlet that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality part is made of durable metal and is sold individually.
Fixes these symptoms
Leaks water


Assembly, Extension – Part Number: 706595
Your Price
$44.88
Assembly, Extension
1 Review
PartSelect Number PS11829839
Manufacturer Part Number 706595
Fixes these symptoms
No Symptoms for this part
Kit-O Ring – Part Number: 705001
Your Price
$17.95
Kit-O Ring
PartSelect Number PS10000585
Manufacturer Part Number 705001
Fixes these symptoms
No Symptoms for this part

Organize Your Home in a Snap!

The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!

"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed."
- Clever Jeff