Toro Lawn Tractor Seals and Gaskets

Seal--Oil (PTO Side)

★★★★★

★★★★★

2 Reviews

This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty as Medium. This part provides a seal around the crank shaft and engine block. When installing onto the engine block around the crank shaft, use something that makes contact around the entire seal, like a large socket or pipe, and tap into place evenly, ensuring that the housing is clean and dry. If the part is broken, likely due to fatigue, there will be leaking oil, and this part should be replaced using the model number on the original part to confirm it is the right fit for your model.

Gasket--Rocker Cover This OEM Gasket Rocker Cover, which can also be called the Valve Cover Gasket, is used to provide a seal between the valve cover and engine. This is a gray-colored part, measuring 5 1/2 x 4 Inch, and it is sold individually. It can be attached using a wrench or socket. Note: this part also requires a Torque Wrench. When installing, tighten and torque in alternating patterns, following the manufacturer specficiations. You will know when it needs to be replaced when there is oil leaking around the valver cover gasket, which is a sign the part is broken, likely due to simple wear and tear or constant dryness. To make sure you are purchasing the right part, check your model number. Customers rated this repair as easy.

Gasket--Crankcase (.015 Thick)

Gasket--Exhaust

Seal,Oil The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "Medium" difficulty and requires a screw driver, wrench set and seal puller. A broken seal will cause a leak, and the part must be replaced. Refer to your make, model and diagram to ensure you're choosing the right part. This part comes in black and gray.

Gasket-Fuel Tank This fuel tank gasket is an OEM part certified by the manufacturer, and it provides a seal on the gas tank and carburetor of your machine. This fuel tank gasket is gray in color and made of composite materials. It is sold individually and is not part of a kit or assembly. Over time, the gasket can become damaged due to fatigue or wear, or it can dry out and the seal will fail. If you notice fuel leaking from the fuel tank gasket, it is time to replace it. This is a medium-difficulty repair that requires a wrench, sockets, and a screwdriver. You will look to reinstall your new part between the carburetor and gas tank. Note that if your carburetor and tank are separated for any other repairs or maintenance, you will also need to replace your fuel tank gasket regardless of condition, as it is a one-time use.

Gasket-Intake

Seal-Oil This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should be replaced. Installation is rated as "Medium" difficulty by customers, and will require a screwdriver, wrenchset and seal puller. Refer to your make, model and diagrams to ensure you've chosen the correct part. This model comes in black and grey.

Gasket--Float Bowl (Nikki)

Cylinder Head Gasket

★★★★★

★★★★★

1 Review

This is a replacement cylinder head gasket for your small engine. It is approximately 5 inches in width and 6 inches in length. The cylinder head gasket helps to create a seal for the cylinder head. If you have oil leaking, or you hear a hissing sound when your engine is in use, you may have a blown head gasket. This part is sold individually and is an OEM part sourced directly from the manufacturer.