Toro Blower Parts
Popular Toro Blower Parts
Your Price
$7.46
In Stock
Your Price
$14.95
In Stock
Toro Blower Cover-Inlet
PartSelect Number PS8833684
Manufacturer Part Number 108-8965
This inlet cover is designed for use with handheld lawn and garden equipment and is located wherever the impeller for your blower is. This inlet cover is a genuine OEM part that features a grill in the middle to allow for free airflow for the impeller and intake of your blower and is made of plastic. Measuring approximately 15-inches in length by 2-inches on one side, 3 on the other, and 5.5 in the middle, this inlet cover can be easily replaced and simply snaps on and off, without the need for tools.
Your Price
$5.89
Special Order
Toro Blower Spark Plug
PartSelect Number PS10018287
Manufacturer Part Number 870174001
This spark plug is a genuine OEM part that is used on gas-powered lawn and garden equipment. It is a small cylindrical device in the engine cylinder head that creates the spark that ignites the fuel and air mixture inside the engine. It has a ceramic insulator, a metal rod, known as the center electrode, and a metal tab at its base, known as the ground electrode. The spark plug may fail due to a buildup of carbon, physical damage, or fouling. If it is faulty, your engine will misfire, consume more fuel, and have difficulty starting. To check that the spark plug is faulty, you can visually inspect it and use either a multimeter or a spark tester to check for electrical failure. Remove the faulty spark plug using a spark plug socket and ratchet. Use your hands to carefully thread the new spark plug into the engine. Regularly inspect and replace your spark plug as part of your general maintenance to keep your equipment in good condition.
Your Price
$5.19
In Stock
Toro Blower Starter Rope 42 In.
PartSelect Number PS10022172
Manufacturer Part Number 900849012
This authentic OEM starter rope measures 42-inches and is for use with various models of outdoor power equipment. Made of nylon, this rope wraps around the starter recoil spring and when pulled, is used to start the engine. This rope is sold as an individual part, so any necessary grips are sold separately.
Your Price
$3.99
In Stock
Your Price
$9.98
On Order
Your Price
$15.29
In Stock
Toro Blower Impeller-Plastic, 9 Blade
PartSelect Number PS11804598
Manufacturer Part Number 125-0494
Your Price
$3.99
In Stock
Toro Blower Nut-Hex
Note: Ensure the appliance is unplug prior to working on it.
1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and washer- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go. Read more...
PartSelect Number PS8843581
Manufacturer Part Number 114-9015
This OEM hex nut secures the blower impeller assembly to the motor drive shaft. This part is black, made out of metal, and is sold individually. Hex nut threads can become damaged, and ends can become rounded off over time. This is a symptom of fatigue and will require replacement. You will know this part is broken if the impeller is no longer able to spin with the drive shaft. There will be no airflow from the blower.
Most of our customers rated this as an easy repair, all you will need is a wrench or socket and torque wrench. When installing your new hex nut on the impeller blower, ensure your torque to the manufacturer specs when securing it to the drive shaft.
Installation Instructions
Donald B Butler from BUFFALO, NY
Could see the impeller was damaged - blades missing.
Safety FirstNote: Ensure the appliance is unplug prior to working on it.
1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and washer- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go. Read more...
Your Price
$25.87
In Stock
Toro Blower Tube-
PartSelect Number PS8832880
Manufacturer Part Number 108-8963
A blower tube is used to give the air that is blown out of a leaf blower a specific direction and point to blow at, and this blower tube attaches to several different makes and models. Made of plastic and measuring approximately 17.5-inches in length, this blower tube attaches to the main blower port on the leaf blower. Since blower tubes are made of plastic, they can break or chip if they are dropped or if the material is overstressed. If you find that your current tube is cracked, damaged or loose, then it needs to be replaced to maintain optimal performance. To replace this tube, simply slide the old tube off and slide the new tube on.
Your Price
$4.99
In Stock
Toro Blower Appliance Types
Popular Toro Blower Models
Below are the most popular Toro Blower models we have. Enter your model number in the search box to find your model.
- 51599 Blower-Vacuum
- 51599 Blower-Vacuum
- 51599 Blower-Vacuum
- 51599 Blower-Vacuum
- 51599 Blower-Vacuum
- 51599 Blower-Vacuum
- 51599 Blower-Vacuum
- 51525 550 Tbx Rake-O-Vac
- 51591 Blower-Vacuum
- 51591 Blower-Vacuum
- 51591 Blower-Vacuum
- 51591 Blower-Vacuum
- 51591 Blower-Vacuum
- 51591 Blower-Vacuum
- 51591 Blower-Vacuum
- 51618 51618, Super Blower/Vacuum, (Sn 321000001-321999999)
- 51618 51618, Super Blower/Vacuum, (Sn 319000001-319999999)
- 51618 Super Blower/Vacuum
- 51618 51618, Super Blower/Vacuum, 2017 (Sn 317181181-317999999)
- 51618 Super Blower/Vacuum