Thermador Refrigerator Brackets and Flanges

Thermador Appliance Parts
Shop By Part Type

Popular Thermador Refrigerator Brackets and Flanges

Your Price
$18.12
  In Stock
Control Bracket
★★★★★
★★★★★
(103)
PartSelect Number PS11739027
Manufacturer Part Number WP2180226
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dispenser section in place. Its measurements are roughly 9 inches long and 5 inches high, and this model comes in white. The tools you will need in order to do this repair include a Phillips screw driver, a quarter-inch nut-driver, and a pair of needle-nose pliers. If your ice dispenser is not working properly, your bracket could be the problem.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Not dispensing water
  • See more...
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks Read more...
Your Price
$5.52
  In Stock
Ice Maker Cover Bracket
★★★★★
★★★★★
(6)
PartSelect Number PS11739245
Manufacturer Part Number WP2198641
This is the replacement ice maker cover bracket for your refrigerator. It is made of white plastic and is approximately 5 inches wide and 2 inches long. The ice maker cover bracket holds and supports the ice maker cover. If the ice maker cover is loose or missing, you may need to replace the bracket. You will also want to replace the bracket if it will not stay in place, or if it is cracked or broken. To replace the cover bracket, simply remove the ice maker cover, then use a ¼ inch nut driver to loosen and remove the bracket. Screw in the new bracket and replace the cover to complete your repair. This is an OEM part that is sold individually.
Fixes these symptoms
Installation Instructions
brian from fresno, CA
broke tab on cover bracket
removed old bracket and replaced with new one - two screws and it was done - simple Read more...
Your Price
$5.52
  In Stock
Holder
★★★★★
★★★★★
(1)
PartSelect Number PS11739144
Manufacturer Part Number WP2188919
Fixes these symptoms
Installation Instructions
Vincent from INDN HBR BCH, FL
Ice Maker Bucket would not rotate arm to dispense ice
This was a very easy repair. First, remove the Ice Bucket off the refrig door. Unfasten the white plastic shaft holder held in place by 2 hex head screws using a nut driver. Remove old shaft and insert the new shaft. Fasten back up with the holder and 2 hex head screws and install the ice bucket and you are ready to dispense ice again. Read more...
Your Price
$24.26
  In Stock
Coupling Holder
PartSelect Number PS11739703
Manufacturer Part Number WP2212369
Installation Instructions
John from Poway, CA
Plastic holder was cracked and broken
I removed the Ice container, removed the two screws that secure the holder, replaced the broken holder with the new one, replaced the screws, and put the ice container back in place. Total time, two minutes. Read more...
Your Price
$5.52
  In Stock
Fan Motor Retainer/Bracket
PartSelect Number PS11738921
Manufacturer Part Number WP2155590
Your Price
$41.46
  In Stock
BRACKET
PartSelect Number PS869685
Manufacturer Part Number 2252228
Your Price
$31.77
  Special Order
BRACKET
PartSelect Number PS1155672
Manufacturer Part Number 2317030
Your Price
$38.01
  Special Order
BRACKET
PartSelect Number PS11705396
Manufacturer Part Number 12004874
Your Price
$44.31
  Special Order
BRACKET
PartSelect Number PS896402
Manufacturer Part Number 2302788
Your Price
$59.80
  Special Order
BRACKET
PartSelect Number PS8730710
Manufacturer Part Number 00647969

Related Parts