Tappan Dishwasher Racks

Tappan Appliance Parts
Shop By Part Type

Popular Tappan Dishwasher Racks

Your Price
$89.43
  Special Order
Dishwasher Lower Dish Rack Assembly
★★★★★
★★★★★
(81)
PartSelect Number PS8760885
Manufacturer Part Number 808602302
This white lower dish rack assembly comes with eight light-gray rollers for easy access. The dish rack is approximately 21 inches wide x 22 inches deep. The dish rack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly.
Fixes these symptoms
Installation Instructions
Lauren from Monmouth, IL
Rusty racks
It was amazing, the items were shipped within days of placing the order. They arrived ready for installation. My husband had the new racks in place in 10 minutes. He removed the wheels from the old racks and placed the wheel on the new racks which required no tools. Then we slid the new racks into place, a perfect fit! Read more...
Your Price
$64.91
  In Stock
Dishwasher Upper Dish rack with Wheels
★★★★★
★★★★★
(19)
PartSelect Number PS10062929
Manufacturer Part Number 5304498211
The upper dishrack is used to hold your dishes in place while the dishwasher goes through the wash cycles. Over time the dishrack can become damaged, start to rust, or be missing rollers, and the dishrack will need to be replaced. This rack is white in color with light gray rollers and measures approximately 23 Inch x 23 Inch. This is a genuine OEM part.
Fixes these symptoms
Installation Instructions
Lauren from Monmouth, IL
Rusty racks
It was amazing, the items were shipped within days of placing the order. They arrived ready for installation. My husband had the new racks in place in 10 minutes. He removed the wheels from the old racks and placed the wheel on the new racks which required no tools. Then we slid the new racks into place, a perfect fit! Read more...
Your Price
$13.12
  In Stock
Single Rack Roller Kit
★★★★★
★★★★★
(17)
PartSelect Number PS452448
Manufacturer Part Number 5300809640
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it.
Fixes these symptoms
Installation Instructions
CHRIS from ROANOKE, VA
Water leaking from Inlet Valve
Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector really tight so it won't leak. I did the final tightning after the part is mounted. Not a bad repair at all. The only problem was that it leaked in the first place and messed up my subfloor and laminate flooring. Read more...
Your Price
$64.41
  In Stock
Upper Dishrack Assembly
★★★★★
★★★★★
(3)
PartSelect Number PS10062926
Manufacturer Part Number 5304498202
Your Price
$31.72
  In Stock
Silverware Basket
★★★★★
★★★★★
(2)
PartSelect Number PS11770512
Manufacturer Part Number 5304506681
This is a basket for your dishwasher. It sits in the lower dishrack and holds small utensils during a washing cycle. This basket has six smaller sections where you can separate your cutlery into specific groups. This silverware holder is made entirely of plastic with a crisscross pattern allowing water and small food particles to pass through it during the cleaning process. This model is grey and roughly 14 inches long, about 6 inches high, and almost 4 inches thick.
Installation Instructions
Thomas F. from Ft Walton Beach, FL
Tenant in one of my rental properties stole the lower dish rack from dishwasher
PartSelect provided the perfect place to order the parts I needed. Illustrated parts breakdown on PartSelect was excellent and the correct part(s) were identified and ordered with no difficulty. I would recommend PartSelect to anyone. Read more...
Your Price
$39.34
  In Stock
Upper Dishrack Slide
★★★★★
★★★★★
(1)
PartSelect Number PS1525080
Manufacturer Part Number 154597801
This is an upper dishrack slide for your dishwasher. It is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack. The mounting screws are not included in this purchase and can be found in the related parts section below. You should purchase a new dishrack slide if your current one has been warped or damaged over time.
Installation Instructions
Terry from Pleasant View, UT
Top rack was dropping out of rollers/Slides
This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in.
1. Removed stops on front end of Upper Dishrack Slide on both sides.
2. Removed Upper Dishrack
3. Remove Roller and Axle/clip (4 each)
4. Push Roller onto Axle on all 4 kits
5. Install all 4 roller kits on Upper Dishrack
6. Remove stops from back end of Upper Dishrack Slides.
7. Remove both Slides
8. Remove 8 each Tub Wheels.
9. Using old or new Screws and Washers, install new Tub Wheels.
10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.
11. Install stops on the back end of Slides.
12 Install Upper Dishrackinto slides
13. Install front stops on slide
14. Pulled out Gasket
15. Install replaced Gasket
Read more...
Your Price
$23.04
  In Stock
Upper Dishrack Roller and Axle Kit
★★★★★
★★★★★
(1)
PartSelect Number PS452630
Manufacturer Part Number 5300809974
The upper dishrack roller and axel kit comes with two pieces, a wheel and an axle. This kit is made for your dishwasher. Both pieces measure to be roughly one square inch each, they are made entirely of plastic, and are white in color. The purpose of these parts is to allow your dishrack to roll easily on the support rails. This kit is sold individually and contains only one wheel and one axle. Please order the required quantity for your repair. If your dishrack is having trouble rolling in and out you may need replace your rollers and axles.
Installation Instructions
Terry from Pleasant View, UT
Top rack was dropping out of rollers/Slides
This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in.
1. Removed stops on front end of Upper Dishrack Slide on both sides.
2. Removed Upper Dishrack
3. Remove Roller and Axle/clip (4 each)
4. Push Roller onto Axle on all 4 kits
5. Install all 4 roller kits on Upper Dishrack
6. Remove stops from back end of Upper Dishrack Slides.
7. Remove both Slides
8. Remove 8 each Tub Wheels.
9. Using old or new Screws and Washers, install new Tub Wheels.
10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.
11. Install stops on the back end of Slides.
12 Install Upper Dishrackinto slides
13. Install front stops on slide
14. Pulled out Gasket
15. Install replaced Gasket
Read more...
Your Price
$34.29
  In Stock
Upper Dishrack Track End Cap
PartSelect Number PS452590
Manufacturer Part Number 5300809927
Sold individually.
Silverware Basket - having seven sections
PartSelect Number PS474724
Manufacturer Part Number 5309951569
This is a silverware basket but may also be known as a basket assembly. The basket holds your utensils and silverware during a dishwashing cycle. The crisscross pattern of this part allows food particles and water to easily fall through it for an easy and thorough clean. This model is white in color and has seven utensil sections. It also has a convenient carrying handle that will allow you to quickly and easily remove the basket from your dishwasher to empty or fill it.
LOWER RACK
PartSelect Number PS979402
Manufacturer Part Number 5304438434
This is a lower dishrack assembly for your dishwasher. It slides into place on the lower half of your appliance to hold dishes and other cookware during the dishwashing cycle. This part includes the rollers, also known as wheels, and axles. This model is a light grey/blue in color and is roughly 24 inches long and 22 inches wide. There is one lower dishrack, eight wheels/rollers, and eight axels included in this kit.

Related Parts