Shindaiwa Clearing Saw Parts
Popular Shindaiwa Clearing Saw Parts
Your Price
$6.82
In Stock
Shindaiwa Clearing Saw Fuel Filter
PartSelect Number PS11836543
Manufacturer Part Number A369000440
This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fuel tank, and is used to clean the fuel of debris.
This part should be changed regularly as part of good engine maintenance. If the engine sounds like it is not getting enough fuel or is underperforming, remove the filter to heck for a blockage. If there is a blockage or the part is leaking, then it likely needs a replacement.
Your Price
$4.99
In Stock
Your Price
$6.39
In Stock
Shindaiwa Clearing Saw Breather Assembly
PartSelect Number PS9314032
Manufacturer Part Number A356000040
This breather, also known as a fuel tank vent, is a genuine OEM replacement part used in trimmers and edgers. It is responsible for managing the pressure and air flow inside the fuel system, by acting as a valve for the fuel tank. It allows clean air to enter the tank, while preventing dirt and debris from entering as well. Over time, the breather can crack or become clogged leading to restricted air flow, inconsistent fuel supply, fuel leakage, hard starting, and engine stalling. Locate the breather on or near the fuel tank and disconnect the hoses and fasteners attached to it. Depending on your model you may need to remove the fuel tank to complete this replacement. Place the new breather in position and reattach the hoses and fasteners. Test the new part by gently blowing into the breather to confirm that the air flow is not restricted.
Your Price
$3.99
In Stock
Shindaiwa Clearing Saw Air Filter-Foam
PartSelect Number PS9179545
Manufacturer Part Number A226000670
The manufacturer certified Foam Air Filter is a black, foam part, used to filter out contaminents from entering the carburetor. It attaches in the air cleaner housing, is rated as "Easy" to install, and requires a screw driver (Tip: put a bit of two-cycle oil in the bag, and let it absorb into the filter). If the part wears out, the engine will burn more fuel and you will have noticably less power because it will be starved for air. If this happens, the part must be replaced. Refer to your make, model and diagram to ensure this air filter is correct for your machine.
Your Price
$5.19
In Stock
Shindaiwa Clearing Saw Fuel Cap Assembly
PartSelect Number PS9180313
Manufacturer Part Number A033000070
This fuel cap assembly is a genuine OEM part and is designed for use with outdoor handheld power equipment. Replacing your fuel cap is as simple as removing the old one and screwing the new cap on. This fuel cap keeps the fuel within the tank during operation, preventing leaks, and ensures that no dirt or debris enter the carburetor, filter, fuel lines or engine. Made of plastic with a cork seal underneath, this fuel cap is sold as an individual part, and has an approximately 2-inch diameter.
Your Price
$4.99
In Stock
Shindaiwa Clearing Saw Clip 6
PartSelect Number PS9238696
Manufacturer Part Number V490000500
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install.
You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.
Your Price
$4.99
In Stock
Your Price
$4.99
In Stock
Shindaiwa Clearing Saw Fuel Pipe Assembly
PartSelect Number PS9322946
Manufacturer Part Number V470001210
Your Price
$5.19
In Stock
Shindaiwa Clearing Saw Gasket
PartSelect Number PS9237390
Manufacturer Part Number V107000010
This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will eventually become brittle because it interacts with gas and oil, meaning it will need replacing before it becomes debris in the fuel tank. This gasket not only prevents debris from entering the fuel tank, but it also prevents any leaks. To replace, simply unscrew your gas cap and remove the old gasket from the cap, and then replace it with the new.
Your Price
$11.47
In Stock
Shindaiwa Clearing Saw Debris Shield
PartSelect Number PS10043465
Manufacturer Part Number C550000391
This part is made from durable plastic material and is sold individually. Please note, the hardware to secure this debris shield is sold separately.
Shindaiwa Clearing Saw Appliance Types
Popular Shindaiwa Clearing Saw Models
Below are the most popular Shindaiwa Clearing Saw models we have. Enter your model number in the search box to find your model.
- C302 Brushcutters (C)
- B450 Brushcutter
- C35 Brushcutter
- C35 Brushcutter
- C35 Brushcutter
- C230 Brushcutter
- C270 Brushcutter
- C344 Brushcutter
- C344 Brushcutters (C)
- C344 Brushcutters (C)
- C344 Brushcutter
- C242 Brush Cutter
- C242 Brush Cutter
- C242 Brush Cutter
- C242 Brushcutter
- C350 Brushcutter
- C270EMC Brushcutters (C)
- C282 Brushcutter
- B45LA Brushcutter
- B45INTL Brushcutter
