Shindaiwa Chainsaw Hardware
Find your partEnter your model number or a part number and click "Search"
Popular Shindaiwa Chainsaw Hardware
PartSelect Number PS9261895
Manufacturer Part Number 13201309820This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers. This part attaches to the fuel filter to secure the fuel line ot the fuel filter. If broken, likely due to fatigue, there may be a fuel leak. If damaged or missing, the part should be replaced. Refer to your owners manual or model number to ensure you are choosing the correct part.
Donald from ORANGE PARK, FL
fuel tank leaking around where lines went in tanktook all the old parts off and replaced them Read more...
PartSelect Number PS10053748
Manufacturer Part Number V490001230Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of metal, and is silver in color. When this clip becomes damaged or worn, it can no longer support the fuel line, which may cause a fuel leak and/or smell. This wear will occur as part of regular use of your equipment. To complete this repair, you will need a wrench, screwdriver, and pliers. It is found in a variety of locations depending on your model; please refer to your owners manual for the exact location. Customers rated this repair as Easy.
Flange Nut 6
PartSelect Number PS9279274
Manufacturer Part Number 43301903933
PartSelect Number PS9148697
Manufacturer Part Number 90050000005This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends). This nut can have various uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.
PartSelect Number PS9237151
Manufacturer Part Number V224000031This part is the replacement stud for your chainsaw. It is approximately 1 ¼ inches long and is black in color. The stud secures the chain bar to the chainsaw. It the stud is damaged or missing, it can become a safety hazard, and will need to be replaced. This part is sold individually and is an OEM part sourced directly from the manufacturer.
PartSelect Number PS9162459
Manufacturer Part Number 90023805020
PartSelect Number PS9323037
Manufacturer Part Number V804000060
PartSelect Number PS9246258
Manufacturer Part Number V355000140
Sam from GAITHERSBURG, MD
worn out paddles and scrapper bladeI followed the instructions on Youtube, but I used an Impact drill and ratchet set. The hardest part is assembling the screw on the lower part of the paddle. It helps if you have your snow blower against a wall or something else so that it can not move b/c you will need some strength to push the screw threw the pre-drilled hole to the 10mm nut. I used a vise grip to hold the nut do to the lack of space and with my impact driver started to thread the screw to the nut. This part took about 1 min on one side and 10 minutes on the other side. I guess I got lucky the first time. Changing the scraper blade took about 4 minutes start to finish. It will help if you have needle nose pliers to remove and reattach the spring on each side. The instruction on you tube were very helpful. Hope you find this information helpful. Read more...