Back
Back
Keep typing for more specific results...

Roper Refrigerator Compressors

Popular Roper Refrigerator Compressors

Your Price
$49.93
  In Stock
Roper Refrigerator Compressor Start Relay
★★★★★
★★★★★
7 Reviews
PartSelect Number PS11750123
Manufacturer Part Number WPW10197428
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge and Freezer are too warm
  • See more...
Installation Instructions
Clyde from ARAB, AL
Refrigerator & Freezer both stopped cooling
Simply move the appliance for access to the back side. Removed the lower metal access panel, locate the compressor ( black round object ) parts are on the left bottom of the compressor. Simply unplug the parts, and replace with new parts.The hard part was, getting my 72 year old body in position to do the job. As far as getting the right part, a young lady in Nova Scoita is the one to ask for help !! Ordered parts one day, and they were in my hands the next morning!! Read more...
Your Price
$69.79
  In Stock
Roper Refrigerator Relay & Overload
★★★★★
★★★★★
9 Reviews
PartSelect Number PS11749877
Manufacturer Part Number WPW10189190
This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge and Freezer are too warm
  • See more...
Installation Instructions
Anna from Lincoln, RI
Our Refrigerator and freezer stopped working
I had read on a fix it site that the start device for the compressor on this particular model was known to fail after 3-5 years. When we received the part it looked like something that just plugged into the compressor. My husband unscrewed the panel in the back of the fridge and saw the part on the compressor. He first removed the three wires that it was connected to, and the wires were inside a plug so all he had to do was remove the plug from the start device. He then removed the old start device from the compressor. Plugged in the wire plug into the new start device, and pushed in the new start device into the compressor. There was also another black part plugged into the old start device that he plugged inot the new start device that connected to the compressor. Our freezer and refrigerator starting working. Within a couple of hours our freezer had made ice. Read more...
Your Price
$64.63
  In Stock
Roper Refrigerator Start Device
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11739841
Manufacturer Part Number WP2225929
This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
Fixes these symptoms
Your Price
$26.95
  In Stock
Roper Refrigerator Drier (service)
PartSelect Number PS11749031
Manufacturer Part Number WPW10143759
This drier may also be known as a refrigerator ultra-violet dye drier or a filter drier and is meant to be used with your fridge. This piece is a filter for the refrigerant that moves through the refrigerators sealed-system. The most common reason you will need to replace the filter is if your fridge/freezer is not starting. You should consider having this piece installed by an appliance repair technician that is trained and licensed. Installing this part requires specialized knowledge and tools. The installation will require the service technician to recover and recharge the refrigerant in the refrigerators sealed-system.
Your Price
$50.44
  In Stock
Roper Refrigerator Compressor Relay And Overload
PartSelect Number PS371538
Manufacturer Part Number 4387913
May differ in appearance, but functions same as original. The overload protects a motor from overheating and the relay boosts the compressor.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge and Freezer are too warm
  • See more...
Installation Instructions
Robert from Austin, TX
Fridge Air On, Not Cooling
Previous issue with this refrigerator and I figure after the Hot summer we've had in TX that it overworked itself this summer in the garage! Caught this one before all was lost as it started it's not cooling cycle on a Sunday. Ordered the identical Relay&Overload from Parts Select, 2 days later I'm back to chilling the beer again! Super service with diagrams and specs. Very glad parts select is around! Read more...
Your Price
$61.69
  In Stock
Roper Refrigerator Start Relay Combination
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11739983
Manufacturer Part Number WP2262181
Start relay and overload for production compressor only. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overlay provides added protection against excessive current and against excessive temperature use.
Fixes these symptoms
  • Freezer section too warm
  • Fridge too warm
  • Will Not Start
  • See more...
Installation Instructions
Calvin from KELLER, TX
Refrigerator/Freezer not getting cold.
Determined that compressor was not running, after researching problem on another site they recommended i try the condenser moor fan or motor, the defrost thermostat or defrost timer. . I was not satisfied with their recommendations. If I had tried their recommendations i would have likely gotten frustrated and spent upwards of $3000 to replace the 22 year-old hand me down unit. Thank you Parts Select for properly diagnosing my relay failure saving me a ton of money. Read more...
Your Price
$50.44
  In Stock
Roper Refrigerator Compressor Overload Protector
PartSelect Number PS11738901
Manufacturer Part Number WP2149959
Relay is NOT included. Must be ordered separately.
Fixes these symptoms
Installation Instructions
Jeffrey from Bedford, NH
loss of cold air and subsequent meltdown of contents
Shut of both freezer and refer section, as well as unplug unit. Remove h2o line to bottom of frig that supplies ice maker. Remove back panel and set aside. Remove green, red and white wires from relay and start device. Be sure to mark which goes where, it may seem simple, but 3-5 days later when the parts arrive, things may look different. Install the two replacement parts in the reverse order by which you removed them. Remember, white tabs are down and touch back of lower part when installed. Install panel and hto line, check for leaks, plug in and turn refer on. Read more...
Your Price
$88.15
  In Stock
Roper Refrigerator Compressor Overload & Start Relay
PartSelect Number PS11742479
Manufacturer Part Number WP4387938
This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
Fixes these symptoms
Your Price
$75.41
  In Stock
Roper Refrigerator Overload And Relay Assembly
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11742477
Manufacturer Part Number WP4387835
This kit comes with the compressor relay, overload and cover.
Fixes these symptoms
  • Freezer section too warm
  • Fridge too warm
  • Will Not Start
  • See more...
Installation Instructions
John from Sachse, TX
Refrigerator not cooling.
Unplugged power cord from the wall outlet
I removed the back cover using a 1/4 nut driver. Removed the two wires, one went to the starter driver the other to the overload protection. Unplugged the part from the compressor.Plugged in new part and re-attached the two wires replaced cover and plugged in power back in to the wall outlet
Read more...
Your Price
$54.40
  In Stock
Roper Refrigerator Startdevice Combination
★★★★★
★★★★★
1 Review
PartSelect Number PS11739951
Manufacturer Part Number WP2258450
Start relay and overload for production compressor only. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overlay provides added protection against excessive current and against excessive temperature use.
Fixes these symptoms
Installation Instructions
Jeffrey from Bedford, NH
loss of cold air and subsequent meltdown of contents
Shut of both freezer and refer section, as well as unplug unit. Remove h2o line to bottom of frig that supplies ice maker. Remove back panel and set aside. Remove green, red and white wires from relay and start device. Be sure to mark which goes where, it may seem simple, but 3-5 days later when the parts arrive, things may look different. Install the two replacement parts in the reverse order by which you removed them. Remember, white tabs are down and touch back of lower part when installed. Install panel and hto line, check for leaks, plug in and turn refer on. Read more...

Related Roper Refrigerator Parts