Range Grilles and Kickplates
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Range Grilles and Kickplates
Your Price
$36.85
In Stock
Range Grill Support
Ignore the other repair comments on this page!!! The new replacement part can no longer be put into place as simply as the original bracket. This is a r3eplacement part with a modified design. Significant parts of the microwave (MW) must be dismantled in order to provide access for insertion of the new part. This is confirmed by notes at other web sites which provide this part. My approach also required cutting/drilling holes into sheet metal panels.
Kitchenaid/Whirlpool must have realized that the original part is inherently weak at the point at which it is supported at the ceiling of the MW. The replacement part is a good option from a strength standpoint, but a horrible one for ease of insertion. The original is a single ceramic piece. The replacement part includes a metal clip which holds the top stem of the ceramic bracket from the top ("roof") side of the MW. Getting at the top of the MW cavity is the difficult part. One needs to pull the entire built in oven from its location and remove at least the control panel from the front of the unit.
It took me 3-4 hours one day to see how to install the replacement part. I failed since I unexpectedly found that there are two sheet metal panels above the MW cavity which need to be removed in order to access the slot through which the bracket stem must be inserted. Maybe somebody else can think of a way to remove the metal panels, but I could not do it so I put the MW back together again.
After this failure I considered trying to repair the original part again (this was the second time it had broken). The first repair broke when the conventional heating element was used in the MW. This option might again be an interim solution so I went back to trying to install the new replacement part.
This time it took over 3 hours to remove the control panel, several wiring units, a transformer, and several side and top sheet metal panels. Each removal step was preceded with a photograph of the item to be removed so that everything could be put back as they were originally located. After all of this work it was determined that the MW would have to virtually be totally dismantled in order to access the bracket slot at the top of the MW cavity. There were simply too many items on top of the sheet metal panels to allow for bending the panels up to access the necessary slot in the oven ceiling.
Fortunately, my wife asked why I didn't consider drilling through the existing sheet metal panels at the top of the MW. Had she suggested that earlier in the dismantling, it would have saved hours of work.
After reassembling the side panels I drilled access holes through the two sheet metal panels over the top of the MW oven. Certainly one needs to be careful in measuring the location for such holes. The holes were to be rectangular, developed by drilling multiple holes around the perimeters of the final "holes." The two sheet metal panels are about 3/4" apart and the lower panel is about 3/4" above the MW oven cavity. After drilling out the holes (about 1/2" x 1") I successfully found the desired slot in the oven ceiling. Then the drill cuttings needed to be cleaned out with a vacuum cleaner - including inside the MW oven.
Inserting the replacement part was not trivial. One needs to hold the ceramic part in the oven, with the heating element in its proper place on the bracket, and then simultaneously place the metal clip onto the stem which has been inserted through the slot at the top of the MW oven. Long tweezers are handy for putting the clip into place. Then the fun begins. Somehow the metal clip must be pushed down onto the ceramic stem. This is a trial and error task with various long blunt tools used to try and push the clip down while not pushing it off to the side. Somehow I got the clip onto the stem and the part was finally in place.
Another hour (+) to re-assemble the MW and push the oven back into the cabinet and the job was finally done.
btw, the only reason it was relatively easy to pull the oven out of the cabinet (and push it back in) was that we have two office chairs at home (without arms) which come up to about the right height for having the oven sit on the chairs. Adding some 2x4's on the seats of the chairs brought it to exactly the right height. The wheels on the chairs also helped. Given the weight of the oven, removing and replacing the oven unit is not a trivial task and one needs to be careful at all times.
There were several observations I made about the new replacement part which also "froze me in my tracks" early in this project. That is why I kept thinking of ways in which to repair the original part more effectively than I had done previously. The problem is that the ceramic section of the replacement part is not the same size as the original. It holds the heating element higher against the ceiling of the microwave and the horizontal section which holds the heating element is shor Read more...
PartSelect Number PS17629632
Manufacturer Part Number W11724411
This part is used to hold up the heating element.
Installation Instructions
Peet from LAKE OSWEGO, OR
The ceramic bracket holding the conventional heating element at the top of the microwave oven broke for the second time
Part No. PS11766760Ignore the other repair comments on this page!!! The new replacement part can no longer be put into place as simply as the original bracket. This is a r3eplacement part with a modified design. Significant parts of the microwave (MW) must be dismantled in order to provide access for insertion of the new part. This is confirmed by notes at other web sites which provide this part. My approach also required cutting/drilling holes into sheet metal panels.
Kitchenaid/Whirlpool must have realized that the original part is inherently weak at the point at which it is supported at the ceiling of the MW. The replacement part is a good option from a strength standpoint, but a horrible one for ease of insertion. The original is a single ceramic piece. The replacement part includes a metal clip which holds the top stem of the ceramic bracket from the top ("roof") side of the MW. Getting at the top of the MW cavity is the difficult part. One needs to pull the entire built in oven from its location and remove at least the control panel from the front of the unit.
It took me 3-4 hours one day to see how to install the replacement part. I failed since I unexpectedly found that there are two sheet metal panels above the MW cavity which need to be removed in order to access the slot through which the bracket stem must be inserted. Maybe somebody else can think of a way to remove the metal panels, but I could not do it so I put the MW back together again.
After this failure I considered trying to repair the original part again (this was the second time it had broken). The first repair broke when the conventional heating element was used in the MW. This option might again be an interim solution so I went back to trying to install the new replacement part.
This time it took over 3 hours to remove the control panel, several wiring units, a transformer, and several side and top sheet metal panels. Each removal step was preceded with a photograph of the item to be removed so that everything could be put back as they were originally located. After all of this work it was determined that the MW would have to virtually be totally dismantled in order to access the bracket slot at the top of the MW cavity. There were simply too many items on top of the sheet metal panels to allow for bending the panels up to access the necessary slot in the oven ceiling.
Fortunately, my wife asked why I didn't consider drilling through the existing sheet metal panels at the top of the MW. Had she suggested that earlier in the dismantling, it would have saved hours of work.
After reassembling the side panels I drilled access holes through the two sheet metal panels over the top of the MW oven. Certainly one needs to be careful in measuring the location for such holes. The holes were to be rectangular, developed by drilling multiple holes around the perimeters of the final "holes." The two sheet metal panels are about 3/4" apart and the lower panel is about 3/4" above the MW oven cavity. After drilling out the holes (about 1/2" x 1") I successfully found the desired slot in the oven ceiling. Then the drill cuttings needed to be cleaned out with a vacuum cleaner - including inside the MW oven.
Inserting the replacement part was not trivial. One needs to hold the ceramic part in the oven, with the heating element in its proper place on the bracket, and then simultaneously place the metal clip onto the stem which has been inserted through the slot at the top of the MW oven. Long tweezers are handy for putting the clip into place. Then the fun begins. Somehow the metal clip must be pushed down onto the ceramic stem. This is a trial and error task with various long blunt tools used to try and push the clip down while not pushing it off to the side. Somehow I got the clip onto the stem and the part was finally in place.
Another hour (+) to re-assemble the MW and push the oven back into the cabinet and the job was finally done.
btw, the only reason it was relatively easy to pull the oven out of the cabinet (and push it back in) was that we have two office chairs at home (without arms) which come up to about the right height for having the oven sit on the chairs. Adding some 2x4's on the seats of the chairs brought it to exactly the right height. The wheels on the chairs also helped. Given the weight of the oven, removing and replacing the oven unit is not a trivial task and one needs to be careful at all times.
There were several observations I made about the new replacement part which also "froze me in my tracks" early in this project. That is why I kept thinking of ways in which to repair the original part more effectively than I had done previously. The problem is that the ceramic section of the replacement part is not the same size as the original. It holds the heating element higher against the ceiling of the microwave and the horizontal section which holds the heating element is shor Read more...
Your Price
$105.67
In Stock
Range Vent Trim - (black)
PartSelect Number PS11752547
Manufacturer Part Number WPW10310922
This black stainless steel oven door vent fits on the top of the oven door, attaches the door handle and the outer glass to the door itself, and vents hot air out of the oven. The vent measures approximately 30.5 inches long x 2 inches wide. This door vent does not come with the attachment screws.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
William from HADLEY, PA
Broken Trim Pieces
Remove vent trim from oven and set oven glass to the side. Next remove handle from vent trim (two screws). Next place handle on new vent trim. Place glass in place, (it is held in place by bottom of oven door and vent trim). next place side trim in place and place that side of the vent trim and loosely tighten screw holding trim into place at top of the glass. Next place the other trim into place under the vent trim and tighten the screws on both sides.
Read more...
Your Price
$100.09
In Stock
Range Microwave Vent Grille
PartSelect Number PS12078122
Manufacturer Part Number AEB73765603
The vent grille covers components inside the microwave while allowing airflow through the slats.
Your Price
$76.45
In Stock
Range Door Top Trim
Approximately 2 minutes to replace. Read more...
PartSelect Number PS2368735
Manufacturer Part Number 316575501
This is the part the handle screws into for installation.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
John from Hummelstown, PA
Broken Door Trim
The top of the door trim broke causing the side and glass to be loose. Easy fix by removing the broken trim and installing the new one. Approximately 2 minutes to replace. Read more...
Your Price
$81.21
In Stock
Range Vent Trim
PartSelect Number PS11753100
Manufacturer Part Number WPW10335331
The Door Vent Trim (White) is an essential OEM replacement part designed to fit a variety of ranges, including models from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. This genuine part is built to replace the original vent trim on the oven door, providing both functionality and aesthetic appeal. The white trim attaches securely to the top of the oven door and houses the door handle, ensuring that the oven door operates smoothly. Made from durable materials, this vent trim is designed to withstand the rigors of daily use while maintaining the sleek look of your range. Installation of the trim requires the oven to be cool to the touch before starting the repair process. Always wear work gloves for protection, as the parts can have sharp edges. To ensure a perfect fit, check that the part is compatible with your specific oven model before ordering, as slight variations in size and shape may occur between different models.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
William from CLINTON TWP, MI
Broke one of the lugs that attach to the range door that door handle attaches to.
Removed 2 screws on inside of oven door being careful not to let front oven door glass to fall off of door. It would probably be a good idea to use tape to hold glass on door before removing screws. Lifted out trim piece with handle and then removed handle and attached to new trim piece and screwed it back onto oven door.
Read more...
Your Price
$48.81
In Stock
Range Grille Vent
PartSelect Number PS11774029
Manufacturer Part Number WB34X25390
Introducing the GE Vent Grille Cover in stylish white. This high-quality appliance part is an essential component of your GE household appliances, ensuring smooth and efficient operation. As a grille vent, it plays a crucial role in air circulation and heat management, protecting delicate inner components and prolonging the lifespan of your appliances. Crafted from durable materials to meet GE's high-quality standards, the vent grille cover is built to resist wear and tear, promising longevity. Select this part for its excellent durability and superior performance, tailored specifically for GE appliances. Make the smart choice for efficient appliance maintenance with the GE Vent Grille Cover.
Your Price
$81.20
In Stock
Range Vent Trim - Black
PartSelect Number PS3507127
Manufacturer Part Number W10294855
Upgrade your Whirlpool appliance with the sleek and genuine OEM Door Vent Trim in black. Specifically designed for some models of the Whirlpool brand, this trim not only augments the visual appeal but also works to house the door handle efficiently. This part attaches to the top of your oven door, providing a smooth, clean appearance. Before installing this distinctive accessory, ensure your oven is cooled completely. Don high quality work gloves for safe installation. For precise compatibility, confirm your model number before purchase. Only the best from Whirlpool.
Your Price
$132.79
In Stock
Range Grille Assembly
PartSelect Number PS16222774
Manufacturer Part Number AEB76124501
This heavy-duty grille provides a stable cooking surface and protects the burners on LG gas ranges. It helps distribute heat evenly and directs airflow to reduce heat buildup. If your current grille is warped or cracked, replacing it can restore safe and efficient cooking. Compatible with select LG and Kenmore models.
Your Price
$57.61
In Stock
Your Price
$78.18
In Stock
Range Vent Trim - White
Be well. Read more...
PartSelect Number PS11723122
Manufacturer Part Number W10817433
Introducing the superior Whirlpool Range Vent Trim in classic white finish, perfect for bringing an elegant touch to your kitchen. This genuine OEM part can flawlessly fit with various models of Whirlpool stoves, ovens, and ranges. As a white air grille, this vent trim attaches to the top of the oven door and houses the door handle. Please ensure your appliance's model is compatible with this part prior to ordering, as minor variations can occur in size and shape. For your safety, always let the oven cool before installing this part, and remember to wear work gloves to protect your hands in the process. Upgrade your kitchen appliance with this essential Whirlpool Range Vent Trim today.
Installation Instructions
Ron from CARIBOU, ME
You
Pleaae prepopulate the manufacturer and part i purchased. I fix a lot of appliances so cannot expend the effort to decipher this. Be well. Read more...