Range Glass Trays and Supports
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Range Glass Trays and Supports
Your Price
$177.52
In Stock
Range Wall Oven Door Window Assembly
followed the video. Read more...
PartSelect Number PS11766932
Manufacturer Part Number WB56X27480
This oven window pack assembly includes a heat-resistant glass pane and its surrounding frame, designed to restore visibility, safety, and energy efficiency to your appliance. Positioned in the oven door, the window allows users to monitor cooking progress without opening the door, helping maintain consistent internal temperatures. A properly sealed window also supports insulation, reducing heat loss and promoting even cooking. Replacement is recommended if the glass is cracked, fogged, or the seal is compromised, as these issues can affect performance and safety. This assembly is engineered for compatibility with select gas and electric oven models and offers a reliable solution for restoring full functionality.
Installation Instructions
Dean from LENEXA, KS
oven door inside glass shattered
watched repair video on disassembling oven door and replacing glass.followed the video. Read more...
Your Price
$65.72
In Stock
Range Microwave Turntable Tray
PartSelect Number PS12728515
Manufacturer Part Number W11373838
This genuine OEM microwave turntable tray is a circular plate made of glass and has a diameter of approximately 16 inches. It rotates food in your microwave oven, so that your food cooks evenly. It is found in the center of your microwave and can be removed from it for cleaning. If your turntable tray is broken, you will notice that it wobbles as it rotates, or it may not rotate at all. With a damaged turntable tray, your food will not cook evenly or thoroughly. The other components in your microwave may also wear out more quickly. To remove your current turntable tray, simply lift it off the spindle in the center of your microwave. This part is sold individually.
Fixes these symptoms
- Tray won’t turn
- See more...
Installation Instructions
Liza from Monterey, CA
Microwave glass turntable when pop
After popping the last few kernals of popcorn, we hear a different kind of pop sound come from our microwave oven. When we looking inside, we found that the glass turntable had broken unevenly in half. Although we didn't understand why it had happned, we did know we'd be without the use of the microwave without a new one. After less than 10 minutes surfing online, I had found the correct part on PartSelect.com and had arranged to have it shipped to me by speedy delivery. Once it arrived, I just popped the new turntable into the microwave and used the box to dispose of the broken one. It could not have been easier and it saved me the cost of a service call and likely further delay.
Read more...
Your Price
$37.78
In Stock
Range Turntable Assembly
PartSelect Number PS16877267
Manufacturer Part Number 5889W2A012Q
This genuine OEM microwave turntable assembly includes essential components such as the glass tray, rotating ring, and support, all working together to ensure smooth rotation during cooking. By evenly distributing microwave energy, it prevents hot spots and promotes uniform heating for consistent results. Crafted for durability and precision, this replacement part restores proper functionality when the original assembly is worn or damaged. Professional installation is recommended for secure placement.
Fixes these symptoms
- Tray won’t turn
- See more...
Your Price
$25.05
In Stock
Range Turntable Assembly
PartSelect Number PS3528549
Manufacturer Part Number 5889W2A012F
This turntable assembly, also known as a rotating ring, is a genuine OEM replacement part for your microwave. It is brown in color and about 10 inches in diameter. This part supports the glass turntable and keeps it in place. Replacing this part is very easy and requires no tools. Simply remove the glass tray, pop out the existing ring and replace with the new one.
Fixes these symptoms
- Tray won’t turn
- See more...
Installation Instructions
Doris from BRONX, NY
The glass was cracked and the turntable burned
Just removed and replaced by putting the new turntable and glass in, 1, 2, 3; that's it. I'm so thankful for this site because I would have had to buy a whole new microwave. Thanks a million!
Read more...
Your Price
$116.74
In Stock
Range Roller Guide
PartSelect Number PS2353388
Manufacturer Part Number WB06X10775
If your microwave’s turntable isn’t rotating smoothly, the roller guide may be the issue. Positioned beneath the glass tray, this component helps ensure even spinning during operation. Designed for select models, it’s a direct replacement that restores proper movement and supports consistent heating. Be sure to check your microwave’s model number before purchasing to confirm compatibility.
Fixes these symptoms
- Tray won’t turn
- See more...
Installation Instructions
Maeta from CLOVERDALE, CA
No problem. Rollers on guide had worn out.
Just put it in place in you Advantium and place your glass tray on it and you’re ready to roll
Read more...
Your Price
$116.74
In Stock
Range Tray Glass
PartSelect Number PS16873477
Manufacturer Part Number WB27X43590
This tray rotates in your microwave ensuring more even temperatures.
Your Price
$57.30
In Stock
Your Price
$30.31
In Stock
Range Microwave Turntable Assembly
The bulb replacement required the side/top/side shell be removed. Only surprise was that some of the attachment screws were tamper-proof torx, so I had to buy a set of tp torx bits to take it apart. They are readily available online for < $10 for a set. They look like a standard torx bit, but with a small hole drilled into the center to accommodate the tamper-proof pin.The bulb assembly has a roughly diamond shaped attachment flange, and you need to use a screwdriver to press plastic spring tabs at each end to release the bulb. Read more...
PartSelect Number PS12115010
Manufacturer Part Number AJS73149201
The turntable support assembly is also known as a roller guide, fits under the cooking tray and is used to support the tray and to engage the rotating coupler. If your cooking tray will not turn, or rumbles when it turns, check the support assembly for signs of wear or damage. If no damage can be seen, check the coupler for damage.
Fixes these symptoms
- Tray won’t turn
- See more...
Installation Instructions
G Michael from PORTLAND, OR
Interior bulb was burned out, turntable internal gear was stripped, and turntable ass'y wheel kept falling off
Motor was simple. Just snip out the bottom cover plate, disconnect the electrical connector, and unscrew the motor. Reverse to reinstall new motor. Rotate the cut out cover plate 180 degrees, fit tabs through slots, and screw back into place.The bulb replacement required the side/top/side shell be removed. Only surprise was that some of the attachment screws were tamper-proof torx, so I had to buy a set of tp torx bits to take it apart. They are readily available online for < $10 for a set. They look like a standard torx bit, but with a small hole drilled into the center to accommodate the tamper-proof pin.The bulb assembly has a roughly diamond shaped attachment flange, and you need to use a screwdriver to press plastic spring tabs at each end to release the bulb. Read more...
Your Price
$47.82
In Stock
Range Microwave Turn Ring
PartSelect Number PS12074822
Manufacturer Part Number W11110134
This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.
Fixes these symptoms
- Tray won’t turn
- See more...
Installation Instructions
jeff from las vegas, NV
Your Price
$134.93
In Stock
Range Microwave Glass Turntable Tray
PartSelect Number PS3486810
Manufacturer Part Number WB39X10032
This 13.5-inch glass turntable tray is designed to fit a variety of microwave models, particularly those from GE and Hotpoint. Constructed from food-safe, heat-resistant tempered glass, it ensures consistent and even heating by rotating food during operation. The tray features a smooth surface and a sturdy build for long-term durability. On the underside, it includes three distinct grooves that align precisely with the microwave’s central bushing coupler, allowing secure placement and smooth rotation. The outer diameter of the tray is approximately 13.5 inches, while the recessed track underneath measures about 10.25 inches across, ensuring compatibility with standard
Installation Instructions
Cheryl from AURORA, IL
Tray and Handle were broken.
Removed the outer frame on the inside of the door. Then I removed the metal frame to get to the handle screws. Removed the handle screws and replaced the broken handle with the new one. Then put everything else back together. For the tray. I just put the new one on the rotating wheel.
Read more...