Range Circuit Boards and Touch Pads

Shop By Brand

Popular Range Circuit Boards and Touch Pads

Your Price
$310.19
  In Stock
Oven Electric Control Board
★★★★★
★★★★★
(3)
PartSelect Number PS9494055
Manufacturer Part Number 5304495520
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...
Installation Instructions
Vic from LACEY, WA
Runaway heating during warmup
Initially replaced the thermostat and the problem continued. Website was spot-on with follow-up procedures and ordered the ECB. Installation was simple. Of particular note is that the digital touch pad from the old unit must be removed and reinstalled on the new one BEFORE you install it. Remove the old touch pad carefully as the sticky backing will peel off the black paint on the back of the touch pad and reveal the circuitry board on the new ECB. Other than that, the process was a simple "plug in and go" install. Super easy! Read more...
Your Price
$320.03
  In Stock
Electronic Control Board
★★★★★
★★★★★
(3)
PartSelect Number PS9494056
Manufacturer Part Number 5304495521
Board only. Overlay is NOT included.
Fixes these symptoms
  • Little to no heat when baking
  • Touchpad does not respond
  • See more...
Installation Instructions
Gregory from SEFFNER, FL
Couldn't get the oven to work and had a constant beep. Unplugged it.
Followed the instructions that came with control board. The new contol kit came with a upgrade, which I think to help keep this from happening again. Very easy repair to do. Read more...
Your Price
$28.75
  In Stock
Overlay - Black
★★★★★
★★★★★
(4)
PartSelect Number PS3502444
Manufacturer Part Number 316419828
NOTE: Overlay only. Control board NOT included.
Fixes these symptoms
Installation Instructions
Bill from LONG BEACH, NY
Needed to change electronic control board
Unplug appliance. Removed back plate cover with 1/4" nut driver (6 screws). Removed old control board with Philips screwdriver (4 screws). Pulled out 5 old connectors. Were a little difficult to get out, had to delicately use a flat head screwdriver to pry loose as not to break the connector. Installed new overlay on new control board (I recommend getting a new overlay and not using the old one, its easier). Reinstalled new control board with 4 screws. Reconnected the 4 connector parts. Installed back plate cover 6 screws. Plugged in and all worked. Read more...
Your Price
$166.05
  In Stock
Oven Electronic Control Board
★★★★★
★★★★★
(9)
PartSelect Number PS12114577
Manufacturer Part Number 5304509493
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...
Installation Instructions
Larry from BIG STONE GAP, VA
Runaway oven temp
After replacing the oven temp sensor, with no success of correction, i purchased and installed the electronic control board. After turning off the power at the breaker and unplugging the stove, I simply removed the top back cover, unclipped the wiring harness, unhooked the 5 oven element wires(writing the color and order for easier reconnection), removed the screws, carefully peeled the face plate off the old control board and re-installed everything in reverse order. Took me all of ten minutes and the oven works like new again. Read more...
Your Price
$115.47
  In Stock
Electronic Control Board
★★★★★
★★★★★
(16)
PartSelect Number PS3493487
Manufacturer Part Number WB27T11311
This part is also known as the "brains" of the appliance. ***NOTE: The wiring could be different than the original control. This part may need to be installed by an appliance repair person.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Touchpad does not respond
  • See more...
Installation Instructions
Julien from Barnhart, MO
Blown Oven Control Board
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in. Read more...
Your Price
$39.08
  In Stock
Overlay - Black
PartSelect Number PS2581771
Manufacturer Part Number 316419141
This is the overly only. Control board is NOT included. Black in color. Genuine OEM part.
Fixes these symptoms
Installation Instructions
Robert from Slidell, LA
Bake element blew out
Removed and replaced bake element. Discovered that oven control module had also blown out. Ordered and replaced new control unit. Stove placed back in service. Read more...
Your Price
$31.79
  In Stock
Overlay - Black
★★★★★
★★★★★
(1)
PartSelect Number PS2581726
Manufacturer Part Number 316220725
Installation Instructions
Theodore from PLAINFIELD, NJ
F 10 code OvenClock/Timer
After watching video on YouTube. It was very easy. I remove 6 screws from back panel then disconnect wires from clock removed 4 screws from clock. Replace new Clock put 4 screws.6 screw on panel. Plug in Gas Range. Job completed. Read more...
Your Price
$47.64
  In Stock
Overlay - Black
PartSelect Number PS2364031
Manufacturer Part Number 316419821
Fixes these symptoms
Your Price
$106.15
  In Stock
Oven Clock Control
★★★★★
★★★★★
(7)
PartSelect Number PS3493488
Manufacturer Part Number WB27T11312
NOTE: This part has been updated by the manufacturer. The wiring could be different than the original and should be installed by an appliance repair person.
Fixes these symptoms
Installation Instructions
John from Gaston, OR
Cooktop oil fire melted plastic parts; control defaced
Some of the original TO-9 switches were fused by the heat. I made them functional again with a cutter on a rotary tool, but to make the repair properly, I ordered the new control unit and the faceplate graphics. Note the guide tabs at the bottom and right edges when replacing the graphics. Don't plan on reusing your old graphics (unless you are a wizard at removing the very strong adhesive).
To gain access to the part, remove the 2 screws (part 715) in the bottom of the control assembly with a stubby screwdriver. Using a nut driver, remove the two screws (part 1000) on the back at the corners, being careful not to drop them behind the oven. Pull out at the bottom, then move the whole unit toward you. Note the position of the wires. A digital photo can help here. Remove the wiring and 4 screws holding the clear plastic TO-9. Put the screws in the new unit in the same holes and rewire. Put the assembly in place top-first and align the screw holes. Finding the same thread placement for the lower screws can be tricky, so start them gently.
Read more...
Your Price
$208.54
  In Stock
Electronic Clock/Timer
★★★★★
★★★★★
(3)
PartSelect Number PS3409083
Manufacturer Part Number 316557118
Fixes these symptoms

Brands