Weed Eater/Weed Eater_Thumb/PE550_Type_5_WW_2.gif.gif
See part B56 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Kit-Gear Set

$20.87   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS9970399
Manufacturer Part Number 530071258
Manufactured by Weed Eater
Troubleshooting
This part works with the following products:
Trimmer, Edger.
This part works with the following products:
Husqvarna, Weed Eater.
Part# 530071258 replaces these:
530071258
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Broken teeth on both large and small gears
    Remove the gear assembly by removing the three Torx screws holding it to the main body, remove gas tank from assembly and set aside without removing gas lines. Remove cover, with blade still installed, that gains access to the gears, remove the large gear and wash out the grease with gasoline. Put penetrating oil like PB Blaster or Liquid Wrench on the end of the bolt at the bottom of the bowel-shaped clutch bell and let it work in. Then, take an Allen wrench that fits the bolt in the small gear and clamp it in a vise with the short end pointing straight up. Set the recess of the bolt on the Allen wrench. This will put the bowl-shaped clutch bell that has 4 holes in it up. Take 2 #2 Phillip's screwdrivers and put them in one of the holes directly across from each other so they form an "X" with the right screwdriver closest to you and the left screwdriver behind the right one.. Then, pushing the screwdriver in the right hand and pulling the screwdriver in the left hand will remove the clutch bell in a counter-clockwise motion. Reverse the above when installing a new gear.
    • Paul from FLORISSANT, MO
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    5 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS9970399
      Manufacturer Part Number: 530071258
      Brand
      Model Number
      Description
      Husqvarna
      GE21
      Trimmer - Edger
      Weed Eater
      PE550
      Edger - Gas Edger

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service