9868931-1-M-Powermate-048-0074-Piston & Cylinder Assembly
Part Location Diagram of 048-0074 Powermate Piston & Cylinder Assembly
See part C-11 in the diagram
( Grid squares measure 1x1 inch )
9868931-1-S-Powermate-048-0074-Piston & Cylinder Assembly Part Location Diagram of 048-0074 Powermate Piston & Cylinder Assembly
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Piston & Cylinder Assembly 048-0074

 Fits your L0502710!
★★★★★
★★★★★
1 Review

Rated by 1 customer 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 228.21
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your L0502710!
PartSelect Number PS9868931
Manufacturer Part Number 048-0074
Manufactured by Powermate
Troubleshooting
This part works with the following products:
Compressor.
This part works with the following products:
Powermate.
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kenneth K - April 5, 2018
  Verified Purchase
Fast repair
The clamp screw that came with the connecting rod would not tighten down the but the one from the old part fit. Took less than an hour to install the kit and the compressor is back to running like new
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Compressor pump not filling ballast tank
1.) Disassemble the pump/motor assembly located on the top of the unit:
a.) Remove outermost plastic shroud. You will need a nut driver with an extension to get to one hex screw - a good Xcelite set will do.
b.) Remove inner plastic shroud with filter sponge. If filter sponge is clogged, replace it.
c.) With plastic shrouds removed, begin disassembling the metal pump components. Start by removing the four screws around the dome cover.
d.) Remove last two screws holding valve plate to piston housing case and remove.
e.) Remove the piston cylinder from the piston housing by lifting up.
f.) Loosen the clamp screw holding the piston rod to the bearing. Pull the piston away from the bearing - you might have to wiggle or pry on it a bit to slip it off. If you have to pry it off, pry only the piston rod itself - take care not to damage the bearing.

2.) Inspect gaskets for wear or damage - replace as necessary. For Piston and Cylinder assembly kit purchased from Parts Select, a gasket mated between the cylinder and valve plate will be included.

3.) Inspect valve plate for bent valve reeds or for debris caught between the valve reeds and the plate. Remove any material found and replace valve reeds as necessary.

4.) Reassemble by following instructions from step 1 in reverse. Mind the torque specifications - images are available online for these torque specifications.
Read less
  • Timothy from Chandler, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS9868931
Manufacturer Part Number: 048-0074
Brand
Model Number
Description
Powermate
CL0501510
Compressor - Air Compressor
Powermate
CL0502710
Compressor - Air Compressor
Powermate
L0501510
Compressor - Air Compressor
Powermate
L0502710
Compressor - Air Compressor
Powermate
P0502010
Compressor - 20 Gallon Oilless, Single Stage, Direct Drive, Electric Air Compressor
Powermate
VP0502510
Compressor - Oilless, Single Stage, Direct Drive, Electric Air Compressor
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Piston & Cylinder Assembly
$ 228.21
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.