Frigidaire/Frigidaire_Thumb/V60CKUUA.gif
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Lower Spray Arm Support

★★★★★
★★★★★
8 Reviews
$ 9.01   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS9865072
Manufacturer Part Number 807145201
Manufactured by Frigidaire
Product Description

Lower Spray Arm Support Specifications

This plastic cover and stem assembly helps hold the lower spray arm in place.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Gibson.
Part# 807145201 replaces these:
AP5948918, 154245501
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Part Videos

Replacing your Frigidaire Dishwasher Lower Spray Arm Support

Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 15 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher was growing mold on inside lid door. Also the glasses were not looking clean. Appeared as if they were not getting rinsed well enough.
First I removed the two screws that hold the lower front cover of the dishwasher to get under the dishwasher. Then I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I then opened the dishwasher door and removed the old element and replaced it with the new element. I closed the dishwasher door and reconnected the two wires making sure that I put the proper wire on the proper post. I then put the two screws back on the element to hold it in place Next I replaed the cover on the front and tested the dishwasher for heat by running it empty.
  • Matt from Bowling Green, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    154665201, 807145201
23 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lock Down On Stem Stripped
Remove 3 screws from stem assembly. Swapped the old for the new, replace screws. Installed and lock lower wash wand. Fixed in 5 min. Great service and prices. My wife thanks you. (Had to hand wash dishes for a few days) thanks
  • Ronnie from Elberfeld, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper rack not being cleaned
This was pretty easy. It was a guess as to the problem, but there much debate , if the water isn't moving it had to be the pump, right?. So i replaced the circulation pump. 2 screws on the top and two trim screws on the bottom, and it slides right out. Then UNPLUG IT.. Take the screen out of the bottom on the inside and make sure you get all the water out or it will end up on the floor when you tip it on it's side. The directions were ok, i looked over them briefly but didn't use them. tools were, phillips srewdriver, torx driver (pump bracket srews) wire stripper/crimper (for the plug adaptor) and a heat gun, (for the heat shrink tube for the crimp connection). Overall it was pretty easy. the pump was made to be easy to replace. 45 min and back in action.
  • steven from Walnut Creek, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    154859101, 807145201
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broke nubs off of stem when cleaning
I took the bottom parts out. This can basically be done without tools. You need a phillips to unscrew 3 screws to remove the stem. Then easily replace with the new one. Putting the spiny washing part was kinda weird because I was afraid to break the nubs off again. I took the whole bottom carriage out so I could see better, pushed down kinda hard and twisted the right way (figure out which way needs to be twisted before hand by looking through the bottom of the stem).
  • Glen from Chicago, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The small "nubs" on the assembly had worn off.
After several years of use and cleaning the small "nubs" that held the locking peice on the assembly under the jet arm had worn off. This allowed the whole thing to spin and the dishes weren't getting clean. Finding the part on the site was easy, it arrived amazingly fast and all is up and working great. I have used Parts Select 2 or 3 times in the past and have always had the same great results. Saved me a bunch in repair bills. Thanks
  • Peggy from Minerva, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom spinner wouldn't stay on
VERY simple---unscrewed three screws on the broken part (the little nubs that held on the bottom spinner were broken off), screwed the new one back in, re-attached the spinner.

I was VERY pleased with the customer service and quick shipping (ordered on Sunday night, the part was delivered Wednesday morning). I would definitely recommend this site to anyone, and would use it again. Five Stars!!!!
  • Kathey from Humboldt, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stem assembly was broken.
I removed the three screws that held the stem assembly in place, removed the old stem assembly and replaced it with the new one. Replaced the screws and began using the dishwasher again.
  • Larry from Fort Huachuca, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken part that holds bottom spray arm on.
This was great! Removed 3 screws, took out old broken part, set in new part and screwed tight! 1 2 3 and done. Very Fast shipping less than 24 hrs.. WIFE IS HAPPY. Ted W.
  • Theo. J. from Green Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom Spray Arm Did not Turn
The bottom spray arm would not turn or fall off the stem assembly, so the dishes would not come clean like usual. The spray arm connects to the stem assembly via two plastic prongs that secure the spray arm. I removed the spray arm from the socket (no tool required) and observed the prongs had worn completely away. I grabbed the power screw driver and removed the assembly (3 screws). I placed the new assembly in place, secured the screws, and attached the spray arm. Finished.
  • david from hull, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original part was damaged and dishes weren't clean
Removed 3 screws, swapped parts - done. Wonderful feeling and saved a service call. Works great.
  • ELIZABETH from ROANOKE, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    807145201
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.8
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS9865072
      Manufacturer Part Number: 807145201
      Brand
      Model Number
      Description
      Kenmore
      58714102800
      Dishwasher
      Kenmore
      58714112400
      Dishwasher
      Kenmore
      58714112401
      Dishwasher
      Kenmore
      58714112402
      Dishwasher
      Kenmore
      58714113400
      Dishwasher
      Kenmore
      58714113401
      Dishwasher
      Kenmore
      58714113402
      Dishwasher
      Kenmore
      58714114400
      Dishwasher
      Kenmore
      58714114401
      Dishwasher
      Kenmore
      58714114402
      Dishwasher
      Kenmore
      58714119400
      Dishwasher
      Kenmore
      58714119401
      Dishwasher
      Kenmore
      58714119402
      Dishwasher
      Kenmore
      58714131100
      Dishwasher
      Kenmore
      58714131101
      Dishwasher
      Kenmore
      58714131102
      Dishwasher
      Kenmore
      58714132100
      Dishwasher
      Kenmore
      58714132101
      Dishwasher
      Kenmore
      58714132102
      Dishwasher
      Kenmore
      58714134100
      Dishwasher
      Kenmore
      58714134101
      Dishwasher
      Kenmore
      58714134102
      Dishwasher
      Kenmore
      58714139100
      Dishwasher
      Kenmore
      58714139101
      Dishwasher
      Kenmore
      58714139102
      Dishwasher
      Kenmore
      58714153400
      Dishwasher
      Kenmore
      58714153401
      Dishwasher
      Kenmore
      58714153402
      Dishwasher
      Kenmore
      58714154400
      Dishwasher
      Kenmore
      58714154401
      Dishwasher

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service