Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My oven door seal was worn and did not seat properly. It leaked heat.The infinite burner was not warming in the low heat positions
I followed two very good videos on how to do the repairs. It took longer to clean all the disassembled parts and the glass than it did to actually do the repair. A word of caution: Be sure to lock the door hinges in the open position before you lift out the door. They must be locked open to put the door back on. It's difficult to loc
... Read morek them open once the door is removed. Also when you replace the screws get them all aligned in the holes before you lock everything down. The infinite burner switch was pretty easy to replace but watch out for sheet metal cuts when you are removing the back of the stove. I recommend gloves. My stove has a 12 inch infinite burner, but the parts list only mentions a 10 inch burner. Before I ordered it, I had to call the company to verify that it could be used for the 12 inch burner as well.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
May 14, 2019
I replaced the heat sensor and the oven still took 35 minutes to reach 350. I noticed that the range oven door seal is worm and torn at the bottom of the door. Can this cause the oven to loose heat and take so long to get to 350
For model number 79094462702
Hello Bob, Thank you for the question. Yes, if the seal is damaged or wore out it can cause the temperatures to be off since the hot air is not sealed. I suggest having it replaced to fix the issue. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
BINKHONG
February 17, 2023
Does installation requires the disassembly of the door or just pushing the ends of the gasket into the holes for the gasket?
For model number 97095164409
Hello Binkhong, thank you for your question. Yes, the door must be taken apart to install the Seal PS977704. We have a very good video for you watch on our website. We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
