Upper Front Felt Seal 134440200 | Official Frigidaire Part | Fast Shipping | PartSelect
Upper Front Felt Seal – Part Number: 134440200
( Grid squares measure 1x1 inch )
Upper Front Felt Seal – Part Number: 134440200 Upper Front Felt Seal – Part Number: 134440200 Upper Front Felt Seal – Part Number: 134440200 https://partselectcom.azureedge.net/Schematics/Frigidaire/B1UTAL80.gif

Upper Front Felt Seal

PartSelect Number PS975866

Manufacturer Part Number 134440200

Manufactured by Frigidaire

Product Description

Upper Front Felt Seal Specifications

This part is the replacement upper front felt seal for your dryer. It is made of felt and is approximately 17 inches long and 1 inch wide. The felt seal allows the drum to glide smoothly on the front panel. If your dryer is noisy, will not tumble, or leaves marks on your clothes after the drying cycle, you may need to replace the upper front felt seal. This part is sold individually, so if you do not have any high-temperature adhesive, you will need to order that as well. Be sure to clean all the residue from your previous felt seal before you install the new one. This ensures a secure fit. This is an OEM part sourced directly from the manufacturer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Noisy | Marks left on clothes | Will not tumble

This part works with the following products:

Dryer.

This part works with the following brands:

Frigidaire, Kenmore, Westinghouse, Crosley, Electrolux.

Part # 134440200 replaces these:

1061871, 5304433902, AP3777104.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Frigidaire Dryer Upper Front Felt Seal

Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gabriellle from Vancouver, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
134440200, 5303937183, 137513300
cloths getting caught along drum glide and lint trap and black streaks/sometimes tearing
1) pulled Dryer out from wall and removed top panel
24 of 31 people found this instruction helpful.
Was this instruction helpful to you?
THEODORE from INDIANAPOLIS, IN
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Parts Used:
134440200, 5303937183, 5308027429
Dryer would make squealing noise when used
First I removed the top of dryer by prying upwards with a screw driver to pop the clips that hold it in place,the second thing I done was to remove to screws that held the front of dryer in place,these screws are located in side the cover half way down.once tha twas completed I remove the front and took it out side where I used a wire brush to remove the old felt at least what was left.onced cleaned I applied the new felt using the supplied high temp glue and then used clothes pins to clamp the felt in place and left sit over night .next morning I installed with ease and all was fixed. NO MORE NOISE:)
11 of 11 people found this instruction helpful.
Was this instruction helpful to you?
bart from sullivan, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
134440200, 137513300
glides clicking paper clip in seal
removed top plus control panel laid on back then removed bottom panel and door panel. This made access to drum simple put new glides on and seals back together and running less than an hour.PS dont let little clips fall down in motor area pain to get out,also great time to clean out unit
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
3.5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
High Temperature Adhesive
$39.16
PartSelect #: PS474458
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before applying the adhesive, en...
Model Cross Reference

This part works with the following models:

PartSelect Number: PS975866
Manufacturer Part Number: 134440200
Brand
Model Number
Description
Kenmore
41774182301
Dryer
Kenmore
41780412700
Dryer
Kenmore
41784042500
Dryer
Kenmore
41784052500
Dryer
Kenmore
41784082500
Dryer
Kenmore
41784092500
Dryer
Kenmore
41784152500
Dryer
Kenmore
41784252500
Dryer
Kenmore
41787042700
Dryer
Kenmore
41788042700
Dryer
Kenmore
41788052700
Dryer
Kenmore
41788056700
Dryer
Kenmore
41788076700
Dryer
Kenmore
41790412700
Dryer
Kenmore
41790412701
Dryer
Kenmore
41794042500
Dryer
Kenmore
41794052500
Dryer
Kenmore
41794082500
Dryer
Kenmore
41794092500
Dryer
Kenmore
41794152500
Dryer
Kenmore
41794252500
Dryer
Kenmore
41797042700
Dryer
Kenmore
41798042700
Dryer
Kenmore
41798042701
Dryer
Kenmore
41798052700
Dryer
Kenmore
41798052701
Dryer
Kenmore
41798056700
Dryer
Kenmore
41798056701
Dryer
Kenmore
41798076700
Dryer
Kenmore
41798076701
Dryer