This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Dishwasher Spinner Kit
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
Part# 8193983 replaces these:
AP3775842, 1059750, 8193983, 8557720
Customer Reviews
Average Rating:
★★★★★
★★★★★
31 Reviews
4.9
Filter By Rating:
5 Stars
29
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marie K - 17 days ago
Verified Purchase
Easy peasy
This was so simple to fix it only took me 30 seconds to do it and now my dishwasher is running like new again!
★★★★★
★★★★★
Albert U - January 4, 2024
Verified Purchase
Another good repair experience.
I love working with PartSelect. The website is easy to use,. Parts are easy to find. The order always arrives on time. If help is needed, the Customer Support team is excellent. Thank you.
★★★★★
★★★★★
Mariette H - October 7, 2023
Verified Purchase
no problems
Ordering and receiving went well. DW is fixed!
★★★★★
★★★★★
John H - March 12, 2022
Verified Purchase
easy
I had the part installed about an hour after I got it in the mail.
★★★★★
★★★★★
Ray M - March 2, 2022
Verified Purchase
Easy repair.
Spinner installed easier than shown in demos for our diswasher.
★★★★★
★★★★★
Michael R - February 26, 2022
Verified Purchase
The video was a lot of help. The dishwasher is working like it did when it was new. Thank you very much.
The part was will packaged. Shipping was fast. Thank you
★★★★★
★★★★★
Burton M - February 26, 2022
Verified Purchase
It is easy to repair BUT
The part worked but repair of the dishwasher requires buying the spinner and PIN, when only the pin was required. The pin wears out but one can't buy several as spares. A waste and poor use of plastic. Engineer a longer lasting pin.
★★★★★
★★★★★
Mitch O - June 10, 2021
Verified Purchase
Great part
Extremely easy install. 10 minutes tops to complete
★★★★★
★★★★★
Berna S - May 4, 2021
Verified Purchase
Spinner replacement
Video was very easy to follow. Thank you for your help.
★★★★★
★★★★★
Robert F - October 16, 2020
Verified Purchase
Correct part first time
the great product drawings for each make and model mean even unusual parts are easy to buy and are exact for replacement. Dishwasher runs like new.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Spinner broke off at interior top. (Little ball on bottom of spinner fell off.)
I am an 84 year-old woman so I asked another woman friend to help me. We removed both shelves from interior of dishwasher then unscrewed the first screw of the slim plastic piece on the top of the interior; then the second screw. We pulled the plastic piece gently down, removed the little round part out of the groove. We placed the new
... Read more round part in the groove (ball down), pushed the spinner onto it so it would click on & hold. That required a bit of strength. Replaced screws & it was done!
Read less
Carole from SOUTHAMPTON, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spinner kept coming loose.
For easier access,removed both trays from dish washer. Pushed both clips apart from upper water arm, let arm hang, removed old spinner, replaced new spinner.
Michael from STEWARTSTOWN, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack of dishes wasn't being cleaned.
All parts were really easy to replace. I just followed the video for each part.
The 1/4" square part that the spinner at the top of the washer wore out and no longer supported the spinner. My dishes were not getting clean
Two philips head screws to get the arm reaching up to the oart removed. Snapped it in and I'm good to go! Clean dishes again! All for a 1/4" part. Just followed the videi on this ste to make the repair.
Mildred from ST SIMONS IS, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Spinner at the top of the dishwasher came off and would not stay on.
First of all I appreciate the instructions provided by this site when I selected the part I needed! The installation was so easy. I popped the end caps off of the top rack guides and removed the top rack. I reach in and popped the clips holding the top sprayer bar and gently pulled down on the sprayer bar enough to place the spinner bu
... Read moretton in the top of the sprayer bar. Then pressed the spinner on the bottom of the sprayer bar into the button I place in the top of the sprayer bar and reattached the sprayer bar to the clips. Put the top rack back on the guides and replaced the guide caps and it was finished. Easy fix thanks to this site great instructions!
Read less
Ronald from SARATOGA SPGS, UT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top spinner kept coming off due to worn bushing
I Removed the upper wash rack by removing locks on each front slide of rack. I laid a towel in the bottom of the washer to keep anything dropped, retrievable. I then removed the top screw closest to the spinner location. I then carefully pulled down on the mounting, which exposed the bad bushing lock. I removed the old bushing lock an
... Read mored replaced with new one. I then replaced the spinner with a push with one hand while holding the bushing in place with the other hand. You will feel a snap as all goes into place. Make sure new spinner spins freely. Now reinstall removed screw. Do not over tighten. Now reinstall lower rack, carefully aligning water feed in rear of washer, and making sure all rollers are back in sliding rack. Reinstall locking tabs onto sliding rack. Now slide out rack, it should not come off slider. Important: now remove the towel in the bottom of the washer. If left in place, you will have a fire during the drying cycle. Close the door and test your washer through a cycle. I felt confident and did a load of dishes. If all went well, spinner should be in place, not in the bottom of the washer.
Read less
Lester from Aguanga, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spinner kept falling off.
Followed the repair video supplied by the site
James from VACAVILLE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper rack not getting clean.
Watch your video about my dishwasher symptoms. Move water tube for upper rack to the right and release lower spray arm. Remove 4 clutch head screws from filter cover and remove. Dig out 10 years of undisolved soap and reassemble.
thomas from FULLERTON, CA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn
Unscrew, replace, reacted
Tim from MADISONVILLE, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Spinner in Dishwasher
The upper spinner was laying in the top washer basket. I went online but no help was avaiable. Went to store where we purchased dishwasher and they gave me part number to order but not online I had to call to order. Part arrived in about three days. I took two screws loose on the top of dishwasher removed broke retainer to put new retai
... Read morener in but I drop it into dishwasher so you have to me very careful so I tried to order just the retainer but is not sold by it self. Had to order whole new kit. Other than that it is easy dishwasher runs like a new one.
Read less
Larry from Abington, MD
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cathleen
January 3, 2018
The spinner fell off in my dishwasher and i would like to know if i can purchase just the barbed spinner holder or do i have to purchase the kit. The spinner is perfectly fine, i would probably want a few of the barbed spinner holders if this is something that will fall off more than just one time(or knocked off by a careless dishwasher loading person lol.)
For model number DU1048XTPQ0
Hi Cathleen,
Thank you for your question. Unfortunately you would have to replace your spinner kit. I hope that helps. Good luck with your repair.
23 people found this helpful.
Was this helpful?
Thank you for voting!
Eugene
July 22, 2017
My problem is i am not getting sufficient water to the middle spray arm and the top spinner. I ordered and replaced the tube, middle spinner, it's seal, and the top spinner. The old replacement parts were corroded and caked with dry dish powder. I am still not getting sufficient water to the middle and top rack. Is it possible the pump is clogged? If i need to clean or replace the pump, do you have remove and replace instruction on how to do this for my model?
For model number KUDK03FTBB3
Hello Eugene,
Thank you for sending in your question, looking through the symptoms for this model and other customers comments they have replaced the Circulation Pump and Motor part number PS11757388. There is a video on the site on how to install this Pump and Motor and it should be of some help for you.
Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 27, 2019
When we run the dishwasher, this spinner falls off. I push it back on, but it falls off each wash. Would it help to replace it, or is the problem with the part it connects to?
For model number MBD7749SBQ
Hello David, thank you for your question. We would recommend replacing the spinner itself. I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
CATHY
April 10, 2019
Dishes on upper rack do not get clean
For model number KUDS35FXBLA
Hi Cathy,
Thank you for your question. If the dishes on the upper rack are not getting clean, there are some things that you will need to check to see what is causing the issue. There may be something blocking the spray arm preventing the water from reaching the upper rack. Check to make sure that there are no obstructions. If the dishwasher is overloaded, this can prevent your dishwasher from cleaning properly. The holes where the water comes out of on the spray arm may be clogged and you will either have to clean the holes out or replace the spray arm. If the dishes are not placed correctly in the rack, this can prevent them from being cleaned properly. Cups and bowls should face down or otherwise water will collect in them. The face of each dish should face toward the center of the dishwasher. Place glasses between spindles rather than on or over them so that water doesn't get trapped. If the water pressure is low going into your dishwasher the dishes on the top rack may not get clean. This can be caused by a kink in the dishwasher hose or low water pressure to your home. If it happens only occasionally, it may be caused by other appliances or activities using water, such as the clothes washer, bathtub and sprinklers. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Teresa
October 7, 2019
The top spinner fell off; will the dishwasher work without the top spinner kit while we wait for the repair?
For model number DUI300xtvb2
Hi Teresa, thank you for your question. It should work though you might have an excess of water coming from the tube at the top where the missing spinner is. So you may see a decrease in the quality of the dish wash. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rita
November 12, 2019
I need a video on how to put this part back in for the dishwasher
For model number 8193983
Hello Rita and thanks for writing.
We have attached the link to our repair video. We hope this helps. Please contact us anytime.
https://www.youtube.com/watch?v=z0rPfElzIPA&feature=emb_title
3 people found this helpful.
Was this helpful?
Thank you for voting!
Wanda
October 3, 2019
Top spinner and spray arm do not turn.
For model number DU1055XTVS3
Hello Wanda, thank you for your question. The first thing we recommend doing is removing the top spinner and cleaning it very well. Make sure its attached securely and that the part is not clogged. It would also be a good idea to check under the bottom spray arm for any clogs or debris that may be down in the sump, if the sump is clogged the water will not be pushed through to the other spray arms. If these sections are clear, we would recommend checking the back manifold tube, and where it connects to the bottom of the dishwasher. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Deb
January 9, 2019
The top rack items aren't cleaning well at all. Could it be the top spinner center part or the entire top spinner part.Should the top spinner mechanism wobble at all?
For model number KUDS40CVSS3
Hi Deb,
Thank you for your question. If the dishes on the top rack are not getting cleaned, then it could be the top spinner. The top spinner should not be wobbling and it should run smoothly. Make sure the holes in the spray arms are not clogged with debris. Make sure the water is hot when using the dishwasher. Run the water in the tap for a few minutes until it is good and hot and then run the dishwasher. Make sure there is adequate water pressure going to the dishwasher. Also, check to make sure the heating element in the dishwasher is working correctly if not, this can prevent the dishes from getting cleaned correctly. How you arrange the dishes in the dishwasher is important as well. If they are arranged in a way that will prevent the water from reaching the dishes on the top rack, then this will prevent them from getting cleaned. There are some other parts that you will need to check to see which one is causing the issue. You will need to check the chopper assembly, the spray arm seal, the sump pump check valve, the impeller and seal kit, the circulation pump and motor, the water supply manifold probe, the lower spray arm, the feed tube and the sump and motor assembly. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stan
August 8, 2018
Where does the flapper go,it is rubber with a 2 hole flapper
Hi Stan, Thank you for your question. We do actually have an installation video for this spinner kit. Here is the link: https://youtu.be/z0rPfElzIPA . Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Wayne
February 18, 2020
My dishwasher is leaking out the top of the door. I replaced the gasket but it did not stop.
For model number KUDS03STSS0
hello Wayne, Thank you for the question. We suggest checking or replacing the Dishwasher Control Panel Seal, PartSelect Number PS11746208. We hope this helps.
