This is a replacement set screw for your refrigerator door. The set screw attaches the door handle to the stud on the refrigerator door. The screw is approximately ¼ of an inch in length and unlike some other screws, it does not have a screw head. It is made of stainless steel and is sold individually. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator, Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WR01X10450 replaces these:
AP3795690, 1091013, WR01X10736, WR02X11850
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
November 24, 2021
I need a screw for the Fresh Food Door. The set screw does not have a screw head. What do I use? I found the WR01x10450 set screw does not fit and I was unable to screw it in. I did not use a tool.
Please help,
Mark
For model number GSH22JSXLSS
Hello Mark, Thank you for your inquiry. If you are looking for the stud screws that go onto the door that set screw goes into, the part number is PS1518029. You can use a 3/32 Allen wrench to tighten the set screws once you remount the handle. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
June 11, 2019
The set screw for the door handle is what size?
For model number GFSL2KEXALS
Hello Frank, Thank you for the question. Very sorry but we do not have the size of the screw for the handle, but I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2340133. Hope this helps!
Does this set screw work for the door of this model?
For model number GTE21GSHCSS
Hi Ken, no it does not sadly, the door handle bolt for your model is part number PS12344566. Thank you for your question and good luck with your repair!
The spring ( set screw ) fell out of refrigerator door handle. How do i put the spring
( set screw ) back in the door handle ?
For model number Gfss2kexa
Hello and thank you for writing.
You can use an Allen wrench to put it back and tighten the screw. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nico
September 14, 2022
Does this set screw work with the door handle for freezer model #FUF21DLRDWW
For model number FUF21DLRDWW
Hello Nico, Thank you for your inquiry. We have researched the model you have provided and do not show this part as compatible. The door set screws actually come with the door fastener kit, part# PS12289835. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Is the set screw for the freezer door the same as the one for the refrigerator door?
For model number PFSS0MFZG SS
Hello Charles, Thank you for your inquiry. We have researched the model number that you have provided and show that the set screw PS963200 is the same for both the refrigerator door handles and the freezer door handle. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Mallie
December 13, 2019
My fridge door handles are loose. It looks like one screw is missing so I am ordering the replacement. It is just a single screw, not a set, right? So if i need 2 screws i should order 2? Also, these screws don't have a head. What kind of tool do I use to tighten the screws? A regular screwdriver doesn't work. Right now I use the tip of a knife, but it only sort of works. Thanks!
For model number GSH25JSTASS
Hi Mallie, you are correct it is 1 screw per order. You can use an allen wrench to tighten the screw. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Jayne
July 27, 2021
The handle is off one side. Missing the screw purchased GE cafe series 2014. Sorry it’s in tenant unit i don’t have model #
For model number GE cafe series bottom mount refrigerator
Hello Jayne, Thank you for contacting us. Since there are multiple versions of this model, in order to locate the correct part, we would need the model number of the unit. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Susan
August 13, 2021
Do you have to disassemble the door on the inside to tighten the handle? Thanks
For model number GBSC0HBXFR
Hello Susan, Thank you for your inquiry. The set screws just screw into the handle fasteners on the door so you should just need a Torx screwdriver or a Torx bit to tighten it. Hope this helps.
Was this helpful?
Thank you for voting!
Yesenia
August 24, 2021
Which door handle screw would be the correct one?
For model number GSHF6HGDCCCC
Hi Yesenia,
Thank you for your question. The part number listed under your model number for the door handle set screw is PS963200. You may also purchase the fasteners that the handles would slide onto if you need them. The part number listed for them is PS2354317. These parts are sold individually. If you would like to place an order for these parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Fridge handle missing set screw.
Opened the package. Set screw fell on floor. Luckily cat found it right away. Fight the cat for the screw. Dug through my tools and the first Allen wrench I picked up fit. "What the hell? That never happens so obviously the screw won't fit," I think to myself. Put the screw in the hole and give it a few turns until my fat finger can't hold it. It's a miracle and the thing fits! Fight the close quarters with the Allen wrench to tighten it. Works like a charm!! Now I don't scare myself when I open the door thinking I'm going to rip the handle right off. Now I have easy access to my ice cream. The parts finder tool on the website was really easy and I found what I was looking for.
Deanna from MANDAN, ND
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
3.8
Filter By Rating:
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joann P - July 6, 2021
Verified Purchase
Great
Went great
★★★★★
★★★★★
Patricia W - July 26, 2019
Verified Purchase
Set Screw for Refrigerator Door
The part came quickly but it was the wrong part.
★★★★★
★★★★★
Adam C - November 28, 2018
Verified Purchase
Set screwed
The part worked perfectly
★★★★★
★★★★★
Robert Q - September 6, 2018
Verified Purchase
So simple
It was a set screw. Right size and wasn't stripped
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS963200
Manufacturer Part Number: WR01X10450
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
