Average Repair Rating: 2.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Troy
January 15, 2018
My dishwasher won't drain intermittently. If I remove the float and ball and replace it works for a while. What else could be casing this unit not to drain. I have replaced the pump already.
For model number GDWT200R10WW
Hi Troy, Thank you for the question. This dishwasher has a service mode to help the technician in troubleshooting the dishwasher. Each part may be cycled to detect if it is functioning properly. Components are cycled by pressing keypads to the right or left of the start/reset keypad. Determine which type of control panel is present (flat or bowed) and then use the matrix on the tech sheet to determine how to cycle each component. To enter service mode, Press the cookware and the heated dry keypad simultaneously for 3 seconds. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
