953545-1-M-GE-WB24X10129 -Fan Switch
Part Location Diagram of WB24X10129 GE Fan Switch
See part 23 in the diagram
953545-1-S-GE-WB24X10129 -Fan Switch 360 view
( Grid squares measure 1x1 inch )
953545-1-S-GE-WB24X10129 -Fan Switch 953545-2-S-GE-WB24X10129 -Fan Switch 953545-3-S-GE-WB24X10129 -Fan Switch 953545-1-S-GE-WB24X10129 -Fan Switch 360 view
Part Location Diagram of WB24X10129 GE Fan Switch
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Fan Switch WB24X10129

★★★★★
★★★★★
8 Reviews

Rated by 2 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 14.41
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS953545
Manufacturer Part Number WB24X10129
Manufactured by GE
Product Description

Fan Switch Specifications

This is the replacement fan switch for your range hood. When you turn the knob to turn the range fan on, the fan switch is actuated. If your fan will not turn on when the knob is turned, you most likely have an issue with the fan switch. The fan has a main square portion with a red center that connects to the fan control knob. The main portion is approximately 1 inch in diameter. This part is sold individually. Be sure to disconnect the power source from your range before you begin this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range Hood.
This part works with the following products:
General Electric.
Part# WB24X10129 replaces these:
AP3754226, 1086018
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.0
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Craig C - May 8, 2023
  Verified Purchase
GE Original
The Part was a GE Original and was easy to install
★★★★★
★★★★★
Don O - July 12, 2019
  Verified Purchase
Good part but durability could be better
This is the third time I have replaced this switch in the 15 years that the range hood, to which the part attaches, has been in use. The switch is easy to install but they are not very durable. The range hood fan is turned on no more than twice a week average. The plastic threaded area breaks easily even though I am careful to not over tighten the nut.
★★★★★
★★★★★
Karen H - June 5, 2019
  Verified Purchase
Fan switch repair
We were successful at replacing our oven hood switch. Thank you!
★★★★★
★★★★★
Alan R - April 2, 2019
  Verified Purchase
Plastic vs metal.....metal wins
Unfortunately, I overtightened the nut and shattered the switch. In time I was able to put the switch back together with electrical tape and install the unit successfully. Maybe making the nut out of plastic also would correct this issue.
★★★★★
★★★★★
Chsrles W - August 28, 2018
  Verified Purchase
Like new
Looks, installed, and works like the broken switch it replaced. Nothing like original equipment.
★★★★★
★★★★★
Colby E - March 2, 2018
  Verified Purchase
Easy installation
Easy installation besides the grease getting on your fingertips from the old switch. The description of the part should include the hex nut which I ordered separately and didn’t need.
★★★★★
★★★★★
Debbie D - February 13, 2018
  Verified Purchase
Very happy with Partselect
Excellent service fast shipping would definitely recommend this company
★★★★★
★★★★★
Julio B - January 25, 2018
  Verified Purchase
easy to repair whit the parts
my appliances is working perfectly whi original parts a order thank you so much for the parts
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
FR Burner out and range hood switches broken
pulled oven out in the open, unplugged from outlet, removed two white front side panels, removed four screws on sides, unplugged range from harness, removed top, unscrewed two metal clips that hold element in place, gently removed wires from element using a small screwdriver and needle nose pliers and attached each one to the new element as it was removed. Reinstalled as I took apart. For the range hood, I unplugged the hood, removed the covers to the switch box and used a small screw driver to open/destroy the old switch and to save the tinned wires. I then pushed in the wires into the new switch as I removed them from the old one. Should be careful to only snug up the hex nuts as the plastic switch stem will probably break easily with a little force.
Read less
Other Parts Used:
Hex Nut ELMNT-SURF Light Switch Fan Switch
  • Morgan from College Station, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
14 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broke off of range hood.
Had to completly change out the switch. The job was really simple and couldn't have done it with out Parts Select. The parts are very reasonable and ship fast.
  • Brent from Corydon, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adan
October 29, 2019
My range hood is a Whirlpool from early 50s , this switch fix ?
PartSelect logo
Hello Adan, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
KNOB
$12.21
$12.21
  In Stock
Light Switch
$13.00
$13.00
  In Stock
Hex Nut
$8.06
$8.06
  On Order
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS953545
Manufacturer Part Number: WB24X10129
Brand
Model Number
Description
General Electric
AV447FBS
Range Hood
General Electric
AV447FWS
Range Hood
General Electric
JV247P1WW
Range Hood
General Electric
JV248P1SS
Range Hood
General Electric
JV347H1BB
Range Hood - Electric
General Electric
JV347H1CC
Range Hood - Electric
General Electric
JV347H1WW
Range Hood - Electric
General Electric
JV347H2BB
Range Hood
General Electric
JV347H2CC
Range Hood
General Electric
JV347H2WW
Range Hood
General Electric
JV348L1SS
Range Hood - Electric
General Electric
JV348L1SSC
Range Hood
General Electric
JV348L2SS
Range Hood
General Electric
JV367H1BB
Range Hood - Electric
General Electric
JV367H1CC
Range Hood - Electric
General Electric
JV367H1WW
Range Hood - Electric
General Electric
JV367H2BB
Range Hood
General Electric
JV367H2CC
Range Hood
General Electric
JV367H2WW
Range Hood
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Fan Switch
$ 14.41
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.