Part Location Diagram of WB20K10015 GE TEMPERATURE SENSOR
See part 43 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

TEMPERATURE SENSOR WB20K10015

 Fits your CGS980SEM1SS!
★★★★★
★★★★★
4 Reviews

Rated by 4 customers 

Very Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 40.61
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your CGS980SEM1SS!
PartSelect Number PS953423
Manufacturer Part Number WB20K10015
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint.
Part# WB20K10015 replaces these:
AP3792591, 1085891
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Oven not lighting
Secured the power, Opened the back of the range, and discovered a rodent chewed the wires in half so I striped the ends and wired them back together, the oven works great !!
  • Charles from SAINT LOUIS, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not holding "Set Temperature"
I followed the "Test Procedures" on your site { VOM to test the Temperature Sensor and observed the intensity of the Igniter } and found both items were not at specs. Although your video did not depict my model oven exactly, it showed me enough details on how to get to and change out the parts. IE: The connector plug for the Flat Style Oven Igniter had to be accessed through the Warning Draw and not the Oven as shown in the video. A minor issue.
I found your test and safety procedures, how to video's and ease of ordering the required parts fantastic. Most importantly the parts arrived in one day and a half. A very satisfying experience, Thank you
Other Parts Used:
TEMPERATURE SENSOR Flat Style Oven Igniter Kit
  • John from FARMINGVILLE, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sometimes the cake bakes, sometimes it doesn't
First replaced temperature sensor following YouTube instructions.

Then removed upper back panel to expose the control board. Removed the screws holding the control board, but DID NOT disconnect the wires. Moved the old control board up over the top of the range to let it rest on the stove top.

Fit the new overlay on the new control board. There are edges on the bottom and one side of the control board that makes aligning it easy.

Then ONE AT A TIME, starting with the largest connector on the end of the board, disconnected a lead and reconnected to the new board. NOTE: THE CONNECTORS ON THE NEW BOARD ARE IN DIFFERENT LOCATIONS THAN ON THE OLD! But if you look closely, they are all labeled. Simply find the same label on the new board and connect the lead from that connector on the old board. Making the right connections is NOT a problem. And there are connectors on the new board that are NOT USED! A note in the packaging warns of this.

Remounted the control board, replaced the back panel, and plugged the range back in. The new control board flashed all the LEDs and the clock started blinking. Set the clock. Turned the oven on and confirmed that it lit, cycled on and off during preheat, and beeped when it came out of preheat.

Since this was a new sensor and a new control board, I used my DMV and thermocouple to check the min/max temp during the heating cycle. Had to calibrate the temp down 5 degrees. Instructions for doing this are on the web and in the owners manual. It is easy.

Finally, did the GE Biscuit Test (Google it) and the biscuits were a bit under baked at the minimum time and a bit over baked at the maximum time. Perfect!

Everything fit, everything worked, took about 45 minutes start to finish. Wife is happy and I'm getting baked goodies again!
Other Parts Used:
OVERLAY T09-A Electronic Control Board TEMPERATURE SENSOR
  • Richard from LEESBURG, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F 3 code came on my panel, the oven wasn’t getting to the right temperature
I remove the old thermostat and realized right away it was burned, the replacement was very easy to clip on
  • Enrico from DURHAM, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

10 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Angele
October 15, 2017
My oven does not get as hot as the temp as it says it is. I have adjusted the control panel but it is 50 to 100 degrees off and the panel indicates that the temps are different on bake and broil.
For model number Jgb916sek5ss
PartSelect logo
Hi Angele, Thank you for your question. I would suggest testing your temperature sensor. That seems to be the most likely part that is the issue. You can also test your igniter as well to make sure that it is working correctly and getting hot enough. If both of those parts are fine, you may have to replace your control board. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Aln
February 13, 2018
Convection fan not working, does not come on, in bake mode. Convection fan works in roast mode. Could it be the temperature sensor?
For model number JGB918SEKSS
PartSelect logo
Hi Aln, Thank you for your question. Yes it could be. I would suggest testing it with a multi meter first to know for sure. If it is not that part it could be either the fan itself or the control board. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Darren
March 10, 2018
This will not come to the proper temperature, it takes hours to get to 425 degrees. Could it be temperature sensor?
PartSelect logo
Hello Darren, Thanks for your question. You will want to test the temperature sensor and your broil/bake elements with a multimeter for electrical continuity. Replace any parts that do not show continuity. I hope this helps.

Was this helpful?
Thank you for voting!
Gregg
April 19, 2018
My oven flashes safe error when oven is on. I have to unplug oven to reset. It then turns the fan on and will continue working. Any idea what the problem could be?
For model number CGS980SEM3SS
PartSelect logo
Hello Gregg, thank you for your question. I would suggest testing your temperature sensor. That seems to be the most likely part that is the issue. You can also test your igniter as well to make sure that it is working correctly and getting hot enough. If both of those parts are fine, you may have to replace your control board. Good luck with your repair.

Was this helpful?
Thank you for voting!
Belinda
August 7, 2018
Code f3 oven sensor
For model number Jgbs66dekbb
PartSelect logo
Hi Belinda, Thank you for your question. The F3 error code does refer to the oven sensor and you will need to check the sensor harness and the connection between the oven sensor and the electronic control board. If wiring is okay, replace electronic control board. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
George
November 5, 2019
Oven lights but won't stay lit. Should i change the temp sensor or ignitor?
For model number JGBP87MEM1BG
PartSelect logo
Hello George, Thank you for your question. We would suggest the igniter under part PS231280 for your model. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
John
September 15, 2021
Oven heats up, reaches temperature then it shuts down
For model number JGB908SEL3SS
PartSelect logo
Hello John, Thank you for the question. A weak gas ignitor can cause the oven to shut off. We suggest testing the Igniter, It should read somewhere between 50 - 1100 ohms of resistance on a Multi Meter. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Brett
September 30, 2021
Very slow heating, will not get to 400F. LP. Temp sensor shows no continuity. You list part# WB20K10015.
For model number JGB916BEK7BB
PartSelect logo
Hello Brett, thank you for your question. We have researched the model you have provided, and we would suggest the temperature sensor, part number PS953423. We hope this helps!

Was this helpful?
Thank you for voting!
Flo
October 30, 2021
Not sure of model number stove says f3
PartSelect logo
Hello Flo, Thank you for the question. The F3 Error code normally indicates a short in the Keypad or wire harness. This would depend on the model and brand appliance. We hope this helps!

Was this helpful?
Thank you for voting!
Miller
November 23, 2021
I see questions about the oven not getting hot enough, but what about "too hot"? The temp on the oven was set to 400° but it seemed so much hotter. So we put in a cooking thermometer and it read over 500°. Would this most likely also be the heat sensor?
For model number Jgbpsel2ss
PartSelect logo
Hello Miller, Thank you for the question. Yes, this can also indicate a defective Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS953423
Manufacturer Part Number: WB20K10015
Brand
Model Number
Description
General Electric
147210
Range
General Electric
147211
Range
General Electric
147212
Range
General Electric
147213
Range
General Electric
147260
Range
General Electric
147261
Range
General Electric
147262
Range
General Electric
147263
Range
General Electric
CGS980SEM1SS
Range - Gas
General Electric
CGS980SEM2SS
Range
General Electric
CGS980SEM3SS
Range
General Electric
CGS980SEM4SS
Range
General Electric
CGS980SEM5SS
Range
General Electric
CGS980SEM6SS
Range
General Electric
CGS980SEM7SS
Range
General Electric
EGR2000EM1BB
Range - Gas
General Electric
EGR2000EM1CC
Range - Gas
General Electric
EGR2000EM1WW
Range - Gas
General Electric
EGR2000EM2BB
Range
General Electric
EGR2000EM2CC
Range
General Electric
EGR2000EM2WW
Range
General Electric
EGR2000EM3BB
Range
General Electric
EGR2000EM3CC
Range
General Electric
EGR2000EM3WW
Range
General Electric
EGR2000EM4BB
Range
General Electric
EGR2000EM4CC
Range
General Electric
EGR2000EM4WW
Range
General Electric
EGR2000EM5BB
Range
General Electric
EGR2000EM5CC
Range
General Electric
EGR2000EM5WW
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service