Quick Question!

Have you ever purchased from PartSelect.com before?

953093-1-S-GE-WB18T10338        -Spark Igniter Switch and Harness Assembly
953093-1-S-GE-WB18T10338        -Spark Igniter Switch and Harness Assembly 953093-2-S-GE-WB18T10338        -Spark Igniter Switch and Harness Assembly https://www.partselect.com/Schematics/GE/00116670i02.gif

Spark Igniter Switch and Harness Assembly

Your Price

$35.07
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS953093
Manufacturer Part Number WB18T10338
Manufactured by GE

This part works with the following brands: General Electric, Kenmore.

This part works with the following products: Cooktop.

This part fixes the following symptoms:

  • Will Not Start.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

I was cleaning the cooktop with the knobs off. I think water got into the switch housing because the igniters were going non stop. I thought i had it dried off but when i plugged it back in the started up again and then a big Flame came out of one of the switches. It looks like all 5 are connected in one housing. My question is how do i get at it? From below? There's a pan under the cooktop that seems bolted in. Do i take this off and then somehow pry those 5 things off the gas prongs? (sorry, i probably have all the wrong names for these parts). Thanks!

catherine for model number JGP962SEC2SS
Answer:

Hi Catherine, Thank you for your inquiry. I have found a repair story on our website from a customer who installed the part. "Do not remove the gas line. Take off the burner racks and burner covers Gently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic. Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a little. To take off the top - use Star screw drivers to remove the burners Remove all the burners. The star screws, and the burners are the only thing holding the top on. Take off the steel top. That exposes the ignitor switch assembly. Make sure you follow the positioning diagram that comes with the new part. Thats it really. I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful." I hope this helps. Thank you and have a great day!

Most Recent

Question:

Hi, i shorted out the igniter switch harness and replaced it. Now 4 of the 5 igniters keep clicking as long as the cooktop is plugged in. The burners will light but only 4 of the 5 will. After the 4th is lit, the clicking stops. This happens if i light left to right or right to left. I bought a new igniter module and swapped it out but that didn't fix the problem. I think either the new switch harness or the new module is bad. Any ideas? I hate to bring a repair guy in! Thanks, cathy

Cathy for model number JGP962SEC2SS
Answer:

Hi Cathy, Thank you for your inquiry. I would try the spark igniter switch and harness assembly, but if this does not work you will need to get a technician to come in and look at the appliance. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: Robert from HARRISON CITY, PA

Two igniters inoperable due to bad igniter switches

There are already some very good instructions for this repair on the website - I followed them as written. I recommend going through the instructions carefully first to make sure you have everything you will need and so you know what to expect. Also, if practical I recommend you do the disassembly before ordering the parts so you know exactly what you need. A couple of burner gaskets got messed up during disassembly, so I decided to replace them and ordered a couple along with the harness assembly. A couple of the igniters were difficult to disconnect from the wiring and I was afraid I was going to break some, but managed to get them off intact. The replacement harness assembly didn't look just like the old one that I removed and at first I thought I'd have to exchange it. Check the paper that comes in the box with the harness and it will show how the new one goes on. Everything went back together easily and all igniters are operating.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1

Model Cross Reference

This part works with the following models:

PartSelect Number: PS953093
Manufacturer Part Number: WB18T10338
Brand Model Number Description
Kenmore91133212101Cooktop
Kenmore91133212102Cooktop
Kenmore91133213101Cooktop
Kenmore91133213102Cooktop
Kenmore91133214102Cooktop
Kenmore91133219101Cooktop
Kenmore91133219102Cooktop
General ElectricJGP630BEK1BBCooktop - Gas
General ElectricJGP630BEK2BBCooktop - Gas
General ElectricJGP630CEK1CCCooktop - Gas
General ElectricJGP630CEK2CCCooktop - Gas
General ElectricJGP630SEK1SSCooktop - Gas
General ElectricJGP630SEK2SSCooktop - Gas
General ElectricJGP630WEK1WWCooktop - Gas
General ElectricJGP630WEK2WWCooktop - Gas
General ElectricJGP633DET1BBCooktop
General ElectricJGP633DET1CCCooktop
General ElectricJGP633DET1WWCooktop
General ElectricJGP633SET1SSCooktop
General ElectricJGP962BEC2BBCooktop - Gas
General ElectricJGP962KED2CCCooktop - Gas
General ElectricJGP962SEC2SSCooktop - Gas
General ElectricJGP962TEC2WWCooktop - Gas
General ElectricJGP963BEC2BBCooktop - Gas
General ElectricJGP963BEJ1BBCooktop - Gas
General ElectricJGP963BEK1BBCooktop - Gas
General ElectricJGP963BEK2BBCooktop - Gas
General ElectricJGP963CEC2CCCooktop - Gas
General ElectricJGP963CEJ1CCCooktop - Gas
General ElectricJGP963CEK1CCCooktop - Gas