GE/GE_Thumb/00123383i01.gif
See part 31 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Vent Grille Frame

$152.95   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS952614
Manufacturer Part Number WB07X10722
Manufactured by GE
Product Description

Vent Grille Frame Specifications

Must order vent grille separately by model#.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB07X10722 replaces these:
AP3777961, 1085311, WB07X10722
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 8 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Grille holding venting mechanism broke
    First, I removed the two phillips screws on the top of the microwave. Then I was able to take the venting mechanism off of the microwave. I unscrewed all of the parts attached to the broken plastic vent and reattached them to the new plastic vent. Once all the parts were on, I simply put the venting mechanism back onto the microwave and placed the two phillips screws back to hold it in place. Lastly, I reattached the springs that allow the vent to close. A simple job done in less than 15 minutes.
    • Kyle from Castro Valley, CA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    15 of 17 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    i was using the microwave one evening, and the vent door in the top front of the oven just snapped, and pieces were every where, plastic, springs, little metal hinges, and i just stared in amazement.
    first thing i did was to mistakenly go to GE's website to order the part, after the part was sent to me broken, and that was in february, i finally received the reimbursement for the part 4 months later. the part was $40.00 less on your site than GE's.
    Overall, there were two screws that held the old grille in place, i removed them, and reassembled all of the springs and then reattached. i am so thankful that i found your website, and will do business with you again! Chuck Luton
    • Charles from Dover, DE
    • Difficulty Level:
      Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    11 of 12 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Vent over top of microwave wouldn't close
    I found the replacement parts by the drawings on the website. The drawings are excellent and very easy to follow. Ordered what I needed and read the previous comments to see how to dismantle the vent and replaced the part. It was slot simpler than expected. Thanks to part select for a great experience.
    Other Parts Used:
    Grille Hinge - Left Side Grille Hinge - Right Side Louver Spring
    • Ronald from Murphys, CA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    6 of 13 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    broken part
    Replaced with new part
    Other Parts Used:
    Louver Spring
    • George from Avon, CO
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    4 of 10 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Vent Grill Frame Just Fell Apart
    I contacted ge , with absolutely no help, thanks to part select I was able to order the part and received it within 4 days it was very easy to take apart, first unscrew the small phillips screw on the top right side , then slide the vent grill to the left and gently pull away from the microwave, that's about it and install in the same manner.
    • DONALD from NEW PORT RICHEY, FL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    plastic screw holes broke off of original part
    replaced existing ancillary parts and installed vent. Very easy repair and I saved 35% on part from manufacturer msrp.
    • wayne from Mount Pleasant, SC
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    2 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Frame broke in several places. It had been assembled inncorrectly at the factory.
    Took pictures of broken frame before removal. Parts from the old frame had to be used on the new frame. Replacement was straight forward and not difficult.
    • Thomas from Marine on St Croix, MN
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    The vent grille frame was broken. How? The vent was loose and not operating properly .
    Removed the screws holding the frame to the microwave and all the screws holding the front stainless vent part. Reattached the vent to the new plastic frame and microwave. I only used a screwdriver.
    • joe from Pomona, CA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS952614
      Manufacturer Part Number: WB07X10722
      Brand
      Model Number
      Description
      General Electric
      JVM2070B
      Microwave - GE Microwave Model JVM2070B Parts
      General Electric
      JVM2070BH001
      Microwave - Counter Top
      General Electric
      JVM2070BH002
      Microwave - Counter Top
      General Electric
      JVM2070BH01
      Microwave - Counter Top
      General Electric
      JVM2070BH02
      Microwave - Counter Top
      General Electric
      JVM2070S
      Microwave - GE Microwave Model JVM2070S Parts
      General Electric
      JVM2070SH001
      Microwave - Counter Top
      General Electric
      JVM2070SH01
      Microwave - Counter Top
      General Electric
      JVM2070SH02
      Microwave - Counter Top
      General Electric
      JVM2070SK01
      Microwave - Counter Top
      General Electric
      JVM2070SK02
      Microwave - Counter Top
      General Electric
      JVM2071BH001
      Microwave - Counter Top
      General Electric
      JVM2071SH001
      Microwave - Counter Top

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service