Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rose A - February 18, 2018
Verified Purchase
Easy repair
The rotating ring guide is new and was very easy to install. It arrived quickly and I'm very satisfied.
★★★★★
★★★★★
Mancil C - November 10, 2021
Verified Purchase
Received timely and in great condition
Received timely and in great condition.
★★★★★
★★★★★
Roland D - February 12, 2019
Verified Purchase
worked perfectly
part was a perfect fit
★★★★★
★★★★★
Kirk C - April 11, 2019
Verified Purchase
Great serrvce!
We received the part in a couple of days with no problem. Excellent service!
★★★★★
★★★★★
MAYA M - October 1, 2020
Verified Purchase
Satisfaction guaranteed
My microwave is over 15 years old and I wasn't very confident I'd be able to find this part for it. I did and it was perfect.
★★★★★
★★★★★
Janet L - December 9, 2020
Verified Purchase
Easy
Works great a little smaller than the original
★★★★★
★★★★★
Jeff C - December 25, 2022
Verified Purchase
Part works fine
A microwave plate rotates again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rotating ring guide
Just open de microwave door, carefully pull out the old ring and then just put the new one on it. Don't push it down!! Just gently turn it until it falls in place.
Note: the axis of the old rotating ring may break, so be very careful when pulling it out. Do it straight up, to avoid leaving a piece of it next to the electric mot
... Read moreor axle.
Read less
JAIME HALE CO L from MIAMI, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No longer rotated item that was being heated.
Removed the old rotating ring guide that was broken on the bottom and replaced with the new part I ordered. Only suggestion is if it doesn't rotate check how you inserted the new part - it has to be a certain way. Works just fine.
Janet from BENNINGTON, VT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Install ice maker
Followed video instructions
Hildy from ELK GROVE, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave stop turning
replaced the rotating ring
PATRICIA M from SUN CITY, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stem on botom of rotating ring broke
Inserted new piece into the hole in base. Placed on the glass top. Piece of cake!
Kim from Norwalk, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave turntable stopped turning
This was probably the easist repair ever. Turns out the shaft of rotating ring assembly that fits over the turntable motor was cracked, so the motor was unable to enage the ring assembly to move it around.
1. lift off (remove) the round glass tray
2. remove the old rotating ring assembly. There was a cracked plasti
... Read morec piece of it still on the motor shaft that I removed with a pair of pliers.
3. slide on the new rotating ring assembly - be careful of the orientation.
4. replace glass tray
Read less
David from Sunnyvale, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
9 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rotating ring assembly
The plastic part which rotates broke and I was about to call and order another microwave. Much to my surprise, this was so easy to just slip into place. Voila!!!!!!!!! now the glass rotates.
Barbara from Camarillo, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken ring assembly-would not rotate
It took longer to figure out the part # than it did to fix. I took out the dish, pulled out the old assebly, slid the new one in and I was finished.
Joseph from Riverview, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The carousel stopped rotating on my microwave
The carousel stopped rotating on my microwave oven because the plastic assembly that rotated underneath the platter had split at the point where it fit on to the rotating shaft underneath the floor of the microwave. I ordered a new plastic assembly and popped it on to the shaft. Problem solved in less than a minute.
William from Washington, DC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
11 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
January 14, 2019
Will your part number wb06x10584 fit this microwave oven ? I have a GE part number ps952406. Are they the same? what is correct part number for my microwave oven ?
For model number JEB1860SM1SSGT
Hello Bob, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS952406, Manufacturer Part Number WB06X10584. These part numbers are the same part. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Barbara
December 20, 2021
I have a GE microwave that was built in Kentucky. The wheel spokes on the plate split. The only replacement you have is P5952406. Will that fit my model?
For model number PEB2060SM2SS
Hi Barbara,
Thank you for your question. The part number listed under your model number for the rotating ring assembly is PS1021750. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Microwave","title":"Microwave","url":"/Microwave-Parts.htm"},{"position":2,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/Microwave-Wheels-and-Rollers.htm"},{"position":3,"name":"WB06X10584","title":"WB06X10584","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
