Roller Guide WB06X10549

Cut the wire connection of access door on the bottom of the oven. Once access door was removed, I took the screw holding the drive motor in place, removed the wire connector and taped the connection to oven so that it did not drop into the bottom of the oven pulled motor out. Put new motor in, put connector back on motor secured the motor with the scre, put access door back in place put roller guide on the drive motor from inside of the oven and put plate on roller and turned it on for a test. it worked.

First I took out the screws holding the sides and back to the microwave. I discovered that the rotissereie motor was also damaged, but had an old GE microwave that had quit working-took out motor from other GE(motor was the same), installed motor in microwave, lined up pin to roller assy. and that was it!

I had previously determined the like culpit was the synchronous motor. The roller guide had flat spots on each roller. Order parts from Part Select - pretty good price, parts were delivered in 3 days - much faster than I expected. Printed out a parts diagram from their website and grabbed my screwdriver. Also needed a pair of side cutters to cut the metal web that held the motor cover in place - only need to unscrew screw that hold the cover in place (bottom), cut the metal connectors, remove the plate and unscrew the screw holding the motor in place, pull out old unit, replace with new motor and secure the motor with the screw. Put the cover in place and secure - put the microwave back on the counter, pluf it in, put something in the oven and start her up. Took less than 15 minutes and cost me $50 for the parts. Great deal and easy to do.